#ifndef __INC_FASTSPI_LED2_H #define __INC_FASTSPI_LED2_H ///@file FastLED.h /// central include file for FastLED, defines the CFastLED class/object #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) #define FASTLED_HAS_PRAGMA_MESSAGE #endif #define FASTLED_VERSION 3003002 #ifndef FASTLED_INTERNAL # ifdef FASTLED_HAS_PRAGMA_MESSAGE # pragma message "FastLED version 3.003.003" # else # warning FastLED version 3.003.003 (Not really a warning, just telling you here.) # endif #endif #ifndef __PROG_TYPES_COMPAT__ #define __PROG_TYPES_COMPAT__ #endif #ifdef SmartMatrix_h #include #endif #ifdef DmxSimple_h #include #endif #ifdef DmxSerial_h #include #endif #include #include "cpp_compat.h" #include "fastled_config.h" #include "led_sysdefs.h" // Utility functions #include "fastled_delay.h" #include "bitswap.h" #include "controller.h" #include "fastpin.h" #include "fastspi_types.h" #include "dmx.h" #include "platforms.h" #include "fastled_progmem.h" #include "lib8tion.h" #include "pixeltypes.h" #include "hsv2rgb.h" #include "colorutils.h" #include "pixelset.h" #include "colorpalettes.h" #include "noise.h" #include "power_mgt.h" #include "fastspi.h" #include "chipsets.h" FASTLED_NAMESPACE_BEGIN /// definitions for the spi chipset constants enum ESPIChipsets { LPD6803, LPD8806, WS2801, WS2803, SM16716, P9813, APA102, SK9822, DOTSTAR }; enum ESM { SMART_MATRIX }; enum OWS2811 { OCTOWS2811,OCTOWS2811_400, OCTOWS2813}; enum SWS2812 { WS2812SERIAL }; #ifdef HAS_PIXIE template class PIXIE : public PixieController {}; #endif #ifdef FASTLED_HAS_CLOCKLESS template class NEOPIXEL : public WS2812Controller800Khz {}; template class SM16703 : public SM16703Controller {}; template class TM1829 : public TM1829Controller800Khz {}; template class TM1812 : public TM1809Controller800Khz {}; template class TM1809 : public TM1809Controller800Khz {}; template class TM1804 : public TM1809Controller800Khz {}; template class TM1803 : public TM1803Controller400Khz {}; template class UCS1903 : public UCS1903Controller400Khz {}; template class UCS1903B : public UCS1903BController800Khz {}; template class UCS1904 : public UCS1904Controller800Khz {}; template class UCS2903 : public UCS2903Controller {}; template class WS2812 : public WS2812Controller800Khz {}; template class WS2852 : public WS2812Controller800Khz {}; template class WS2812B : public WS2812Controller800Khz {}; template class GS1903 : public WS2812Controller800Khz {}; template class SK6812 : public SK6812Controller {}; template class SK6822 : public SK6822Controller {}; template class APA106 : public SK6822Controller {}; template class PL9823 : public PL9823Controller {}; template class WS2811 : public WS2811Controller800Khz {}; template class WS2813 : public WS2813Controller {}; template class APA104 : public WS2811Controller800Khz {}; template class WS2811_400 : public WS2811Controller400Khz {}; template class GE8822 : public GE8822Controller800Khz {}; template class GW6205 : public GW6205Controller800Khz {}; template class GW6205_400 : public GW6205Controller400Khz {}; template class LPD1886 : public LPD1886Controller1250Khz {}; template class LPD1886_8BIT : public LPD1886Controller1250Khz_8bit {}; #ifdef DmxSimple_h template class DMXSIMPLE : public DMXSimpleController {}; #endif #ifdef DmxSerial_h template class DMXSERIAL : public DMXSerialController {}; #endif #endif enum EBlockChipsets { #ifdef PORTA_FIRST_PIN WS2811_PORTA, WS2813_PORTA, WS2811_400_PORTA, TM1803_PORTA, UCS1903_PORTA, #endif #ifdef PORTB_FIRST_PIN WS2811_PORTB, WS2813_PORTB, WS2811_400_PORTB, TM1803_PORTB, UCS1903_PORTB, #endif #ifdef PORTC_FIRST_PIN WS2811_PORTC, WS2813_PORTC, WS2811_400_PORTC, TM1803_PORTC, UCS1903_PORTC, #endif #ifdef PORTD_FIRST_PIN WS2811_PORTD, WS2813_PORTD, WS2811_400_PORTD, TM1803_PORTD, UCS1903_PORTD, #endif #ifdef HAS_PORTDC WS2811_PORTDC, WS2813_PORTDC, WS2811_400_PORTDC, TM1803_PORTDC, UCS1903_PORTDC, #endif }; #if defined(LIB8_ATTINY) #define NUM_CONTROLLERS 2 #else #define NUM_CONTROLLERS 8 #endif typedef uint8_t (*power_func)(uint8_t scale, uint32_t data); /// High level controller interface for FastLED. This class manages controllers, global settings and trackings /// such as brightness, and refresh rates, and provides access functions for driving led data to controllers /// via the show/showColor/clear methods. /// @nosubgrouping class CFastLED { // int m_nControllers; uint8_t m_Scale; ///< The current global brightness scale setting uint16_t m_nFPS; ///< Tracking for current FPS value uint32_t m_nMinMicros; ///< minimum µs between frames, used for capping frame rates. uint32_t m_nPowerData; ///< max power use parameter power_func m_pPowerFunc; ///< function for overriding brightness when using FastLED.show(); public: CFastLED(); /// Add a CLEDController instance to the world. Exposed to the public to allow people to implement their own /// CLEDController objects or instances. There are two ways to call this method (as well as the other addLeds) /// variations. The first is with 3 arguments, in which case the arguments are the controller, a pointer to /// led data, and the number of leds used by this controller. The second is with 4 arguments, in which case /// the first two arguments are the same, the third argument is an offset into the CRGB data where this controller's /// CRGB data begins, and the fourth argument is the number of leds for this controller object. /// @param pLed - the led controller being added /// @param data - base point to an array of CRGB data structures /// @param nLedsOrOffset - number of leds (3 argument version) or offset into the data array /// @param nLedsIfOffset - number of leds (4 argument version) /// @returns a reference to the added controller static CLEDController &addLeds(CLEDController *pLed, struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0); /// @name Adding SPI based controllers //@{ /// Add an SPI based CLEDController instance to the world. /// There are two ways to call this method (as well as the other addLeds) /// variations. The first is with 2 arguments, in which case the arguments are a pointer to /// led data, and the number of leds used by this controller. The second is with 3 arguments, in which case /// the first argument is the same, the second argument is an offset into the CRGB data where this controller's /// CRGB data begins, and the third argument is the number of leds for this controller object. /// /// This method also takes a 1 to 5 template parameters for identifying the specific chipset, data and clock pins, /// RGB ordering, and SPI data rate /// @param data - base point to an array of CRGB data structures /// @param nLedsOrOffset - number of leds (3 argument version) or offset into the data array /// @param nLedsIfOffset - number of leds (4 argument version) /// @tparam CHIPSET - the chipset type /// @tparam DATA_PIN - the optional data pin for the leds (if omitted, will default to the first hardware SPI MOSI pin) /// @tparam CLOCK_PIN - the optional clock pin for the leds (if omitted, will default to the first hardware SPI clock pin) /// @tparam RGB_ORDER - the rgb ordering for the leds (e.g. what order red, green, and blue data is written out in) /// @tparam SPI_DATA_RATE - the data rate to drive the SPI clock at, defined using DATA_RATE_MHZ or DATA_RATE_KHZ macros /// @returns a reference to the added controller template CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case LPD6803: { static LPD6803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case LPD8806: { static LPD8806Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2801: { static WS2801Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2803: { static WS2803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SM16716: { static SM16716Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case P9813: { static P9813Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case DOTSTAR: case APA102: { static APA102Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SK9822: { static SK9822Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } } } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case LPD6803: { static LPD6803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case LPD8806: { static LPD8806Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2801: { static WS2801Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2803: { static WS2803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SM16716: { static SM16716Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case P9813: { static P9813Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case DOTSTAR: case APA102: { static APA102Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SK9822: { static SK9822Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } } } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case LPD6803: { static LPD6803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case LPD8806: { static LPD8806Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2801: { static WS2801Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case WS2803: { static WS2803Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SM16716: { static SM16716Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case P9813: { static P9813Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case DOTSTAR: case APA102: { static APA102Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } case SK9822: { static SK9822Controller c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } } } #ifdef SPI_DATA template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { return addLeds(data, nLedsOrOffset, nLedsIfOffset); } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { return addLeds(data, nLedsOrOffset, nLedsIfOffset); } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { return addLeds(data, nLedsOrOffset, nLedsIfOffset); } #endif //@} #ifdef FASTLED_HAS_CLOCKLESS /// @name Adding 3-wire led controllers //@{ /// Add a clockless (aka 3wire, also DMX) based CLEDController instance to the world. /// There are two ways to call this method (as well as the other addLeds) /// variations. The first is with 2 arguments, in which case the arguments are a pointer to /// led data, and the number of leds used by this controller. The second is with 3 arguments, in which case /// the first argument is the same, the second argument is an offset into the CRGB data where this controller's /// CRGB data begins, and the third argument is the number of leds for this controller object. /// /// This method also takes a 2 to 3 template parameters for identifying the specific chipset, data pin, and rgb ordering /// RGB ordering, and SPI data rate /// @param data - base point to an array of CRGB data structures /// @param nLedsOrOffset - number of leds (3 argument version) or offset into the data array /// @param nLedsIfOffset - number of leds (4 argument version) /// @tparam CHIPSET - the chipset type (required) /// @tparam DATA_PIN - the optional data pin for the leds (required) /// @tparam RGB_ORDER - the rgb ordering for the leds (e.g. what order red, green, and blue data is written out in) /// @returns a reference to the added controller template class CHIPSET, uint8_t DATA_PIN, EOrder RGB_ORDER> static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CHIPSET c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } template class CHIPSET, uint8_t DATA_PIN> static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CHIPSET c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } template class CHIPSET, uint8_t DATA_PIN> static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CHIPSET c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } #if defined(__FASTLED_HAS_FIBCC) && (__FASTLED_HAS_FIBCC == 1) template class CHIPSET, uint8_t DATA_PIN, EOrder RGB_ORDER=RGB> static CLEDController &addLeds(struct CRGB *data, int nLeds) { static __FIBCC c; return addLeds(&c, data, nLeds); } #endif #ifdef FASTSPI_USE_DMX_SIMPLE template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case DMX: { static DMXController controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } } } #endif //@} #endif /// @name Adding 3rd party library controllers //@{ /// Add a 3rd party library based CLEDController instance to the world. /// There are two ways to call this method (as well as the other addLeds) /// variations. The first is with 2 arguments, in which case the arguments are a pointer to /// led data, and the number of leds used by this controller. The second is with 3 arguments, in which case /// the first argument is the same, the second argument is an offset into the CRGB data where this controller's /// CRGB data begins, and the third argument is the number of leds for this controller object. This class includes the SmartMatrix /// and OctoWS2811 based controllers /// /// This method also takes a 1 to 2 template parameters for identifying the specific chipset and rgb ordering /// RGB ordering, and SPI data rate /// @param data - base point to an array of CRGB data structures /// @param nLedsOrOffset - number of leds (3 argument version) or offset into the data array /// @param nLedsIfOffset - number of leds (4 argument version) /// @tparam CHIPSET - the chipset type (required) /// @tparam RGB_ORDER - the rgb ordering for the leds (e.g. what order red, green, and blue data is written out in) /// @returns a reference to the added controller template class CHIPSET, EOrder RGB_ORDER> static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CHIPSET c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } template class CHIPSET> static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CHIPSET c; return addLeds(&c, data, nLedsOrOffset, nLedsIfOffset); } #ifdef USE_OCTOWS2811 template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case OCTOWS2811: { static COctoWS2811Controller controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } case OCTOWS2811_400: { static COctoWS2811Controller controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } #ifdef WS2813_800kHz case OCTOWS2813: { static COctoWS2811Controller controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } #endif } } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { return addLeds(data,nLedsOrOffset,nLedsIfOffset); } #endif #ifdef USE_WS2812SERIAL template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { static CWS2812SerialController controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } #endif #ifdef SmartMatrix_h template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { case SMART_MATRIX: { static CSmartMatrixController controller; return addLeds(&controller, data, nLedsOrOffset, nLedsIfOffset); } } } #endif //@} #ifdef FASTLED_HAS_BLOCKLESS /// @name adding parallel output controllers //@{ /// Add a block based CLEDController instance to the world. /// There are two ways to call this method (as well as the other addLeds) /// variations. The first is with 2 arguments, in which case the arguments are a pointer to /// led data, and the number of leds used by this controller. The second is with 3 arguments, in which case /// the first argument is the same, the second argument is an offset into the CRGB data where this controller's /// CRGB data begins, and the third argument is the number of leds for this controller object. /// /// This method also takes a 2 to 3 template parameters for identifying the specific chipset and rgb ordering /// RGB ordering, and SPI data rate /// @param data - base point to an array of CRGB data structures /// @param nLedsOrOffset - number of leds (3 argument version) or offset into the data array /// @param nLedsIfOffset - number of leds (4 argument version) /// @tparam CHIPSET - the chipset/port type (required) /// @tparam NUM_LANES - how many parallel lanes of output to write /// @tparam RGB_ORDER - the rgb ordering for the leds (e.g. what order red, green, and blue data is written out in) /// @returns a reference to the added controller template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { switch(CHIPSET) { #ifdef PORTA_FIRST_PIN case WS2811_PORTA: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2811_400_PORTA: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2813_PORTA: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case TM1803_PORTA: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case UCS1903_PORTA: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); #endif #ifdef PORTB_FIRST_PIN case WS2811_PORTB: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2811_400_PORTB: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2813_PORTB: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case TM1803_PORTB: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case UCS1903_PORTB: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); #endif #ifdef PORTC_FIRST_PIN case WS2811_PORTC: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2811_400_PORTC: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2813_PORTC: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case TM1803_PORTC: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case UCS1903_PORTC: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); #endif #ifdef PORTD_FIRST_PIN case WS2811_PORTD: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2811_400_PORTD: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2813_PORTD: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case TM1803_PORTD: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case UCS1903_PORTD: return addLeds(new InlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); #endif #ifdef HAS_PORTDC case WS2811_PORTDC: return addLeds(new SixteenWayInlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2811_400_PORTDC: return addLeds(new SixteenWayInlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case WS2813_PORTDC: return addLeds(new SixteenWayInlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case TM1803_PORTDC: return addLeds(new SixteenWayInlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); case UCS1903_PORTDC: return addLeds(new SixteenWayInlineBlockClocklessController(), data, nLedsOrOffset, nLedsIfOffset); #endif } } template static CLEDController &addLeds(struct CRGB *data, int nLedsOrOffset, int nLedsIfOffset = 0) { return addLeds(data,nLedsOrOffset,nLedsIfOffset); } //@} #endif /// Set the global brightness scaling /// @param scale a 0-255 value for how much to scale all leds before writing them out void setBrightness(uint8_t scale) { m_Scale = scale; } /// Get the current global brightness setting /// @returns the current global brightness value uint8_t getBrightness() { return m_Scale; } /// Set the maximum power to be used, given in volts and milliamps. /// @param volts - how many volts the leds are being driven at (usually 5) /// @param milliamps - the maximum milliamps of power draw you want inline void setMaxPowerInVoltsAndMilliamps(uint8_t volts, uint32_t milliamps) { setMaxPowerInMilliWatts(volts * milliamps); } /// Set the maximum power to be used, given in milliwatts /// @param milliwatts - the max power draw desired, in milliwatts inline void setMaxPowerInMilliWatts(uint32_t milliwatts) { m_pPowerFunc = &calculate_max_brightness_for_power_mW; m_nPowerData = milliwatts; } /// Update all our controllers with the current led colors, using the passed in brightness /// @param scale temporarily override the scale void show(uint8_t scale); /// Update all our controllers with the current led colors void show() { show(m_Scale); } /// clear the leds, wiping the local array of data, optionally black out the leds as well /// @param writeData whether or not to write out to the leds as well void clear(bool writeData = false); /// clear out the local data array void clearData(); /// Set all leds on all controllers to the given color/scale /// @param color what color to set the leds to /// @param scale what brightness scale to show at void showColor(const struct CRGB & color, uint8_t scale); /// Set all leds on all controllers to the given color /// @param color what color to set the leds to void showColor(const struct CRGB & color) { showColor(color, m_Scale); } /// Delay for the given number of milliseconds. Provided to allow the library to be used on platforms /// that don't have a delay function (to allow code to be more portable). Note: this will call show /// constantly to drive the dithering engine (and will call show at least once). /// @param ms the number of milliseconds to pause for void delay(unsigned long ms); /// Set a global color temperature. Sets the color temperature for all added led strips, overriding whatever /// previous color temperature those controllers may have had /// @param temp A CRGB structure describing the color temperature void setTemperature(const struct CRGB & temp); /// Set a global color correction. Sets the color correction for all added led strips, /// overriding whatever previous color correction those controllers may have had. /// @param correction A CRGB structure describin the color correction. void setCorrection(const struct CRGB & correction); /// Set the dithering mode. Sets the dithering mode for all added led strips, overriding /// whatever previous dithering option those controllers may have had. /// @param ditherMode - what type of dithering to use, either BINARY_DITHER or DISABLE_DITHER void setDither(uint8_t ditherMode = BINARY_DITHER); /// Set the maximum refresh rate. This is global for all leds. Attempts to /// call show faster than this rate will simply wait. Note that the refresh rate /// defaults to the slowest refresh rate of all the leds added through addLeds. If /// you wish to set/override this rate, be sure to call setMaxRefreshRate _after_ /// adding all of your leds. /// @param refresh - maximum refresh rate in hz /// @param constrain - constrain refresh rate to the slowest speed yet set void setMaxRefreshRate(uint16_t refresh, bool constrain=false); /// for debugging, will keep track of time between calls to countFPS, and every /// nFrames calls, it will update an internal counter for the current FPS. /// @todo make this a rolling counter /// @param nFrames - how many frames to time for determining FPS void countFPS(int nFrames=25); /// Get the number of frames/second being written out /// @returns the most recently computed FPS value uint16_t getFPS() { return m_nFPS; } /// Get how many controllers have been registered /// @returns the number of controllers (strips) that have been added with addLeds int count(); /// Get a reference to a registered controller /// @returns a reference to the Nth controller CLEDController & operator[](int x); /// Get the number of leds in the first controller /// @returns the number of LEDs in the first controller int size() { return (*this)[0].size(); } /// Get a pointer to led data for the first controller /// @returns pointer to the CRGB buffer for the first controller CRGB *leds() { return (*this)[0].leds(); } }; #define FastSPI_LED FastLED #define FastSPI_LED2 FastLED #ifndef LEDS #define LEDS FastLED #endif extern CFastLED FastLED; // Warnings for undefined things #ifndef HAS_HARDWARE_PIN_SUPPORT #warning "No pin/port mappings found, pin access will be slightly slower. See fastpin.h for info." #define NO_HARDWARE_PIN_SUPPORT #endif FASTLED_NAMESPACE_END #endif