#include "FastLED.h" // Pride2015 // Animated, ever-changing rainbows. // by Mark Kriegsman #if FASTLED_VERSION < 3001000 #error "Requires FastLED 3.1 or later; check github for latest code." #endif #define DATA_PIN 3 //#define CLK_PIN 4 #define LED_TYPE WS2811 #define COLOR_ORDER GRB #define NUM_LEDS 200 #define BRIGHTNESS 255 CRGB leds[NUM_LEDS]; void setup() { delay(3000); // 3 second delay for recovery // tell FastLED about the LED strip configuration FastLED.addLeds(leds, NUM_LEDS) .setCorrection(TypicalLEDStrip) .setDither(BRIGHTNESS < 255); // set master brightness control FastLED.setBrightness(BRIGHTNESS); } void loop() { pride(); FastLED.show(); } // This function draws rainbows with an ever-changing, // widely-varying set of parameters. void pride() { static uint16_t sPseudotime = 0; static uint16_t sLastMillis = 0; static uint16_t sHue16 = 0; uint8_t sat8 = beatsin88( 87, 220, 250); uint8_t brightdepth = beatsin88( 341, 96, 224); uint16_t brightnessthetainc16 = beatsin88( 203, (25 * 256), (40 * 256)); uint8_t msmultiplier = beatsin88(147, 23, 60); uint16_t hue16 = sHue16;//gHue * 256; uint16_t hueinc16 = beatsin88(113, 1, 3000); uint16_t ms = millis(); uint16_t deltams = ms - sLastMillis ; sLastMillis = ms; sPseudotime += deltams * msmultiplier; sHue16 += deltams * beatsin88( 400, 5,9); uint16_t brightnesstheta16 = sPseudotime; for( uint16_t i = 0 ; i < NUM_LEDS; i++) { hue16 += hueinc16; uint8_t hue8 = hue16 / 256; brightnesstheta16 += brightnessthetainc16; uint16_t b16 = sin16( brightnesstheta16 ) + 32768; uint16_t bri16 = (uint32_t)((uint32_t)b16 * (uint32_t)b16) / 65536; uint8_t bri8 = (uint32_t)(((uint32_t)bri16) * brightdepth) / 65536; bri8 += (255 - brightdepth); CRGB newcolor = CHSV( hue8, sat8, bri8); uint16_t pixelnumber = i; pixelnumber = (NUM_LEDS-1) - pixelnumber; nblend( leds[pixelnumber], newcolor, 64); } }