esmp3/include/config.h

81 lines
2.0 KiB
C

#pragma once
#include <Arduino.h>
#define SHOW_DEBUG
//#define SHOW_TRACE
#define FTP_DEBUG
#define WIFI_SSID "Schlenz"
#define WIFI_PASS "1410WischlingenPanda"
#define VS1053_SLEEP_DELAY 5000
#define MQTT_REPORT_INTERVAL 10000
#define PIN_SD_CS(x) (digitalWrite(16, x))
#define PIN_SD_CS_SETUP() (pinMode(16, OUTPUT))
#define PIN_VS1053_XCS(x) (digitalWrite(4, x))
#define PIN_VS1053_XCS_SETUP() (pinMode(4, OUTPUT))
#define PIN_VS1053_XRESET(x) (digitalWrite(0, x))
#define PIN_VS1053_XRESET_SETUP() (pinMode(0, OUTPUT))
#define PIN_VS1053_XDCS(x) (digitalWrite(2, x))
#define PIN_VS1053_XDCS_SETUP() (pinMode(2, OUTPUT))
#define PIN_VS1053_DREQ() (digitalRead(15))
#define PIN_VS1053_DREQ_SETUP() (pinMode(15, INPUT))
#define PIN_RC522_CS(x) (digitalWrite(17, x))
#define PIN_RC522_CS_SETUP() (pinMode(17, OUTPUT))
#define PIN_SPEAKER_L(x) (digitalWrite(27, x))
#define PIN_SPEAKER_L_SETUP() (pinMode(27, OUTPUT))
#define PIN_SPEAKER_R(x) (digitalWrite(26, x))
#define PIN_SPEAKER_R_SETUP() (pinMode(26, OUTPUT))
#define BTN_PREV() ( ! digitalRead(22))
#define BTN_PREV_SETUP() (pinMode(22, INPUT_PULLUP))
#define BTN_VOL_UP() ( ! digitalRead(21))
#define BTN_VOL_UP_SETUP() (pinMode(21, INPUT_PULLUP))
#define BTN_VOL_DOWN() ( ! digitalRead(32))
#define BTN_VOL_DOWN_SETUP() (pinMode(32, INPUT_PULLUP))
#define BTN_NEXT() ( ! digitalRead(33))
#define BTN_NEXT_SETUP() (pinMode(33, INPUT_PULLUP))
#define MCP_I2C_ADDR 7
#define NUM_BUTTONS 4
#define DEBOUNCE_MILLIS 200
#define VOLUME_DEFAULT 230
#define VOLUME_MIN 190
#define VOLUME_MAX 255
#define VOLUME_STEP 0x08
#define MCP_SPI_SETTING_DELAY 1
#define RFID_SCAN_INTERVAL 100
// Other definitions
#define INFO(x, ...) Serial.printf(x, ##__VA_ARGS__)
#define ERROR(x, ...) Serial.printf(x, ##__VA_ARGS__)
#ifdef SHOW_DEBUG
#define DEBUG(x, ...) Serial.printf(x, ##__VA_ARGS__)
#else
#define DEBUG(x, ...) while(0) {}
#endif
#ifdef SHOW_TRACE
#define TRACE(x, ...) Serial.printf(x, ##__VA_ARGS__)
#else
#define TRACE(x, ...) while(0) {}
#endif