MQTT: Subscribe to just one topic. Subtopics are used for parsing. Also, you can now disable MQTT via MQTT_ENABLE.

config.sample.h

@@ -12,19 +12,15 @@
 uint8_t config_brightness = 20; // Can be overwritten via MQTT_TOPIC_BRIGHTNESS
 
 #define NTP_SERVER "pool.ntp.org"
-#define NTP_INTERVAL 60000
+#define NTP_INTERVAL 300000
 #define NTP_OFFSET 7200
 
+#define MQTT_ENABLE
 #define MQTT_SERVER "....."
 #define MQTT_PORT 1883
 #define MQTT_USER "pitrix"
 #define MQTT_PASS "....."
-#define MQTT_TOPIC_MODE "pitrix/mode"
-#define MQTT_TOPIC_STATUS "pitrix/status"
-#define MQTT_TOPIC_LOG "pitrix/log"
-#define MQTT_TOPIC_BRIGHTNESS "pitrix/brightness"
-#define MQTT_TOPIC_EFFECT_CYCLE_TIME "pitrix/cycle_time"
-#define MQTT_TOPIC_REBOOT "pitrix/reboot"
+#define MQTT_TOPIC "pitrix/" // MQTT-Topic to listen to. Must not start with a slash, but must end with one."
 
 #define HOSTNAME "pitrix-%08X"
 #define OTA_STARTUP_DELAY 5 // How many seconds to wait at startup. Set to 0 to disable.

mqtt.h

@@ -1,32 +1,35 @@
+#ifdef MQTT_ENABLE
 PubSubClient mqtt_client(wifi);
 long mqtt_last_reconnect_attempt = 0;
 
-void mqtt_callback(char* topic, byte* payload, unsigned int length) {
-  payload[length] = '\0';
-  if(strcmp(topic, MQTT_TOPIC_MODE)==0) {
+void mqtt_callback(char* complete_topic, byte* pl, unsigned int length) {
+  pl[length] = '\0';
+  char* payload = (char*)pl;
+  char* topic = complete_topic + strlen(MQTT_TOPIC); // Strip MQTT_TOPIC from the beginning
+  
+  // Here, payload is a char* (but has to be casted).
+  if(strcmp(topic, "mode")==0) {
     for (int i=0; i<NUM_EFFECTS; i++) {
       EffectEntry* e = &effects[i];
-      if (strcmp(e->name, (char*)payload)==0) {
+      if (strcmp(e->name, payload)==0) {
         //Serial.printf("Effect found in mqtt_callback: %p\n", (void *)&e->effect);
         current_effect = e->effect;
         clear();
         return;
       }
     }
-  } else if (strcmp(topic, MQTT_TOPIC_BRIGHTNESS)==0) {
-    long new_value = atol((char *) payload);
-    if (new_value > 0 && new_value <= 255) {
-      config_brightness = new_value;
-      FastLED.setBrightness(config_brightness);
-    }
-  } else if (strcmp(topic, MQTT_TOPIC_EFFECT_CYCLE_TIME)==0) {
-    long new_value = atol((char *) payload);
-    if (new_value > 0) {
-      config_effect_cycle_time = new_value;
-    }
-  } else if (strcmp(topic, MQTT_TOPIC_REBOOT)==0) {
+  } else if (strcmp(topic, "reboot")==0) {
     ESP.restart();
   }
+  
+  long value = atol(payload);
+  
+  if (strcmp(topic, "brightness")==0 && value > 0 && value <= 255) {
+    config_brightness = value;
+    FastLED.setBrightness(config_brightness);
+  } else if (strcmp(topic, "cycle_time")==0 && value > 0) {
+    config_effect_cycle_time = value;
+  }
 }
 
 boolean mqtt_connect() {
@@ -35,11 +38,8 @@ boolean mqtt_connect() {
   LOG("MQTT * Connecting to MQTT server with client id "); LOGln(client_id);
   if (mqtt_client.connect(client_id, MQTT_USER, MQTT_PASS)) {
     LOGln("MQTT * Connected.");
-    mqtt_client.subscribe(MQTT_TOPIC_MODE);
-    mqtt_client.subscribe(MQTT_TOPIC_BRIGHTNESS);
-    mqtt_client.subscribe(MQTT_TOPIC_EFFECT_CYCLE_TIME);
-    mqtt_client.subscribe(MQTT_TOPIC_REBOOT);
-    mqtt_client.publish(MQTT_TOPIC_STATUS, "ONLINE");
+    mqtt_client.publish(MQTT_TOPIC "status", "ONLINE");
+    mqtt_client.subscribe(MQTT_TOPIC "+");
   }
   return mqtt_client.connected();
 }
@@ -63,3 +63,4 @@ void mqtt_loop() {
     mqtt_client.loop();
   }
 }
+#endif // MQTT_ENABLE

pitrix.ino

@@ -5,7 +5,7 @@
 
 #define FASTLED_INTERNAL
 #include "FastLED.h"
-#include <PubSubClient.h>
+
 #include "SimpleList.h"
 #include "ntp.h"
 
@@ -101,13 +101,18 @@ void setup() {
   ota_setup();
   fastled_setup();
   ntpClient.begin();
-  mqtt_setup();
+  #ifdef MQTT_ENABLE
+  	mqtt_setup();
+  #endif
   Serial.println("Core * Setup complete");
 }
 
 Effect* current_effect = &clock;
 
-#include "mqtt.h"
+#ifdef MQTT_ENABLE
+	#include <PubSubClient.h>
+	#include "mqtt.h"
+#endif
 
 uint8_t starting_up = OTA_STARTUP_DELAY;
 int loop_timeouts = 0;
@@ -131,7 +136,9 @@ void loop() {
   }
   
   ntpClient.update();
-  mqtt_loop();
+  #ifdef MQTT_ENABLE
+    mqtt_loop();
+  #endif
   
   EVERY_N_MILLISECONDS(1000 / FPS) {
     Serial.println("Core * loop running");