715 lines
23 KiB
C++
715 lines
23 KiB
C++
#define FASTLED_INTERNAL
|
|
#include <stdint.h>
|
|
|
|
#include "FastLED.h"
|
|
|
|
FASTLED_NAMESPACE_BEGIN
|
|
|
|
// Functions to convert HSV colors to RGB colors.
|
|
//
|
|
// The basically fall into two groups: spectra, and rainbows.
|
|
// Spectra and rainbows are not the same thing. Wikipedia has a good
|
|
// illustration here
|
|
// http://upload.wikimedia.org/wikipedia/commons/f/f6/Prism_compare_rainbow_01.png
|
|
// from this article
|
|
// http://en.wikipedia.org/wiki/Rainbow#Number_of_colours_in_spectrum_or_rainbow
|
|
// that shows a 'spectrum' and a 'rainbow' side by side. Among other
|
|
// differences, you'll see that a 'rainbow' has much more yellow than
|
|
// a plain spectrum. "Classic" LED color washes are spectrum based, and
|
|
// usually show very little yellow.
|
|
//
|
|
// Wikipedia's page on HSV color space, with pseudocode for conversion
|
|
// to RGB color space
|
|
// http://en.wikipedia.org/wiki/HSL_and_HSV
|
|
// Note that their conversion algorithm, which is (naturally) very popular
|
|
// is in the "maximum brightness at any given hue" style, vs the "uniform
|
|
// brightness for all hues" style.
|
|
//
|
|
// You can't have both; either purple is the same brightness as red, e.g
|
|
// red = #FF0000 and purple = #800080 -> same "total light" output
|
|
// OR purple is 'as bright as it can be', e.g.
|
|
// red = #FF0000 and purple = #FF00FF -> purple is much brighter than red.
|
|
// The colorspace conversions here try to keep the apparent brightness
|
|
// constant even as the hue varies.
|
|
//
|
|
// Adafruit's "Wheel" function, discussed here
|
|
// http://forums.adafruit.com/viewtopic.php?f=47&t=22483
|
|
// is also of the "constant apparent brightness" variety.
|
|
//
|
|
// TODO: provide the 'maximum brightness no matter what' variation.
|
|
//
|
|
// See also some good, clear Arduino C code from Kasper Kamperman
|
|
// http://www.kasperkamperman.com/blog/arduino/arduino-programming-hsb-to-rgb/
|
|
// which in turn was was based on Windows C code from "nico80"
|
|
// http://www.codeproject.com/Articles/9207/An-HSB-RGBA-colour-picker
|
|
|
|
|
|
|
|
|
|
|
|
void hsv2rgb_raw_C (const struct CHSV & hsv, struct CRGB & rgb);
|
|
void hsv2rgb_raw_avr(const struct CHSV & hsv, struct CRGB & rgb);
|
|
|
|
#if defined(__AVR__) && !defined( LIB8_ATTINY )
|
|
void hsv2rgb_raw(const struct CHSV & hsv, struct CRGB & rgb)
|
|
{
|
|
hsv2rgb_raw_avr( hsv, rgb);
|
|
}
|
|
#else
|
|
void hsv2rgb_raw(const struct CHSV & hsv, struct CRGB & rgb)
|
|
{
|
|
hsv2rgb_raw_C( hsv, rgb);
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
#define APPLY_DIMMING(X) (X)
|
|
#define HSV_SECTION_6 (0x20)
|
|
#define HSV_SECTION_3 (0x40)
|
|
|
|
void hsv2rgb_raw_C (const struct CHSV & hsv, struct CRGB & rgb)
|
|
{
|
|
// Convert hue, saturation and brightness ( HSV/HSB ) to RGB
|
|
// "Dimming" is used on saturation and brightness to make
|
|
// the output more visually linear.
|
|
|
|
// Apply dimming curves
|
|
uint8_t value = APPLY_DIMMING( hsv.val);
|
|
uint8_t saturation = hsv.sat;
|
|
|
|
// The brightness floor is minimum number that all of
|
|
// R, G, and B will be set to.
|
|
uint8_t invsat = APPLY_DIMMING( 255 - saturation);
|
|
uint8_t brightness_floor = (value * invsat) / 256;
|
|
|
|
// The color amplitude is the maximum amount of R, G, and B
|
|
// that will be added on top of the brightness_floor to
|
|
// create the specific hue desired.
|
|
uint8_t color_amplitude = value - brightness_floor;
|
|
|
|
// Figure out which section of the hue wheel we're in,
|
|
// and how far offset we are withing that section
|
|
uint8_t section = hsv.hue / HSV_SECTION_3; // 0..2
|
|
uint8_t offset = hsv.hue % HSV_SECTION_3; // 0..63
|
|
|
|
uint8_t rampup = offset; // 0..63
|
|
uint8_t rampdown = (HSV_SECTION_3 - 1) - offset; // 63..0
|
|
|
|
// We now scale rampup and rampdown to a 0-255 range -- at least
|
|
// in theory, but here's where architecture-specific decsions
|
|
// come in to play:
|
|
// To scale them up to 0-255, we'd want to multiply by 4.
|
|
// But in the very next step, we multiply the ramps by other
|
|
// values and then divide the resulting product by 256.
|
|
// So which is faster?
|
|
// ((ramp * 4) * othervalue) / 256
|
|
// or
|
|
// ((ramp ) * othervalue) / 64
|
|
// It depends on your processor architecture.
|
|
// On 8-bit AVR, the "/ 256" is just a one-cycle register move,
|
|
// but the "/ 64" might be a multicycle shift process. So on AVR
|
|
// it's faster do multiply the ramp values by four, and then
|
|
// divide by 256.
|
|
// On ARM, the "/ 256" and "/ 64" are one cycle each, so it's
|
|
// faster to NOT multiply the ramp values by four, and just to
|
|
// divide the resulting product by 64 (instead of 256).
|
|
// Moral of the story: trust your profiler, not your insticts.
|
|
|
|
// Since there's an AVR assembly version elsewhere, we'll
|
|
// assume what we're on an architecture where any number of
|
|
// bit shifts has roughly the same cost, and we'll remove the
|
|
// redundant math at the source level:
|
|
|
|
// // scale up to 255 range
|
|
// //rampup *= 4; // 0..252
|
|
// //rampdown *= 4; // 0..252
|
|
|
|
// compute color-amplitude-scaled-down versions of rampup and rampdown
|
|
uint8_t rampup_amp_adj = (rampup * color_amplitude) / (256 / 4);
|
|
uint8_t rampdown_amp_adj = (rampdown * color_amplitude) / (256 / 4);
|
|
|
|
// add brightness_floor offset to everything
|
|
uint8_t rampup_adj_with_floor = rampup_amp_adj + brightness_floor;
|
|
uint8_t rampdown_adj_with_floor = rampdown_amp_adj + brightness_floor;
|
|
|
|
|
|
if( section ) {
|
|
if( section == 1) {
|
|
// section 1: 0x40..0x7F
|
|
rgb.r = brightness_floor;
|
|
rgb.g = rampdown_adj_with_floor;
|
|
rgb.b = rampup_adj_with_floor;
|
|
} else {
|
|
// section 2; 0x80..0xBF
|
|
rgb.r = rampup_adj_with_floor;
|
|
rgb.g = brightness_floor;
|
|
rgb.b = rampdown_adj_with_floor;
|
|
}
|
|
} else {
|
|
// section 0: 0x00..0x3F
|
|
rgb.r = rampdown_adj_with_floor;
|
|
rgb.g = rampup_adj_with_floor;
|
|
rgb.b = brightness_floor;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#if defined(__AVR__) && !defined( LIB8_ATTINY )
|
|
void hsv2rgb_raw_avr(const struct CHSV & hsv, struct CRGB & rgb)
|
|
{
|
|
uint8_t hue, saturation, value;
|
|
|
|
hue = hsv.hue;
|
|
saturation = hsv.sat;
|
|
value = hsv.val;
|
|
|
|
// Saturation more useful the other way around
|
|
saturation = 255 - saturation;
|
|
uint8_t invsat = APPLY_DIMMING( saturation );
|
|
|
|
// Apply dimming curves
|
|
value = APPLY_DIMMING( value );
|
|
|
|
// The brightness floor is minimum number that all of
|
|
// R, G, and B will be set to, which is value * invsat
|
|
uint8_t brightness_floor;
|
|
|
|
asm volatile(
|
|
"mul %[value], %[invsat] \n"
|
|
"mov %[brightness_floor], r1 \n"
|
|
: [brightness_floor] "=r" (brightness_floor)
|
|
: [value] "r" (value),
|
|
[invsat] "r" (invsat)
|
|
: "r0", "r1"
|
|
);
|
|
|
|
// The color amplitude is the maximum amount of R, G, and B
|
|
// that will be added on top of the brightness_floor to
|
|
// create the specific hue desired.
|
|
uint8_t color_amplitude = value - brightness_floor;
|
|
|
|
// Figure how far we are offset into the section of the
|
|
// color wheel that we're in
|
|
uint8_t offset = hsv.hue & (HSV_SECTION_3 - 1); // 0..63
|
|
uint8_t rampup = offset * 4; // 0..252
|
|
|
|
|
|
// compute color-amplitude-scaled-down versions of rampup and rampdown
|
|
uint8_t rampup_amp_adj;
|
|
uint8_t rampdown_amp_adj;
|
|
|
|
asm volatile(
|
|
"mul %[rampup], %[color_amplitude] \n"
|
|
"mov %[rampup_amp_adj], r1 \n"
|
|
"com %[rampup] \n"
|
|
"mul %[rampup], %[color_amplitude] \n"
|
|
"mov %[rampdown_amp_adj], r1 \n"
|
|
: [rampup_amp_adj] "=&r" (rampup_amp_adj),
|
|
[rampdown_amp_adj] "=&r" (rampdown_amp_adj),
|
|
[rampup] "+r" (rampup)
|
|
: [color_amplitude] "r" (color_amplitude)
|
|
: "r0", "r1"
|
|
);
|
|
|
|
|
|
// add brightness_floor offset to everything
|
|
uint8_t rampup_adj_with_floor = rampup_amp_adj + brightness_floor;
|
|
uint8_t rampdown_adj_with_floor = rampdown_amp_adj + brightness_floor;
|
|
|
|
|
|
// keep gcc from using "X" as the index register for storing
|
|
// results back in the return structure. AVR's X register can't
|
|
// do "std X+q, rnn", but the Y and Z registers can.
|
|
// if the pointer to 'rgb' is in X, gcc will add all kinds of crazy
|
|
// extra instructions. Simply killing X here seems to help it
|
|
// try Y or Z first.
|
|
asm volatile( "" : : : "r26", "r27" );
|
|
|
|
|
|
if( hue & 0x80 ) {
|
|
// section 2: 0x80..0xBF
|
|
rgb.r = rampup_adj_with_floor;
|
|
rgb.g = brightness_floor;
|
|
rgb.b = rampdown_adj_with_floor;
|
|
} else {
|
|
if( hue & 0x40) {
|
|
// section 1: 0x40..0x7F
|
|
rgb.r = brightness_floor;
|
|
rgb.g = rampdown_adj_with_floor;
|
|
rgb.b = rampup_adj_with_floor;
|
|
} else {
|
|
// section 0: 0x00..0x3F
|
|
rgb.r = rampdown_adj_with_floor;
|
|
rgb.g = rampup_adj_with_floor;
|
|
rgb.b = brightness_floor;
|
|
}
|
|
}
|
|
|
|
cleanup_R1();
|
|
}
|
|
// End of AVR asm implementation
|
|
|
|
#endif
|
|
|
|
void hsv2rgb_spectrum( const CHSV& hsv, CRGB& rgb)
|
|
{
|
|
CHSV hsv2(hsv);
|
|
hsv2.hue = scale8( hsv2.hue, 191);
|
|
hsv2rgb_raw(hsv2, rgb);
|
|
}
|
|
|
|
|
|
// Sometimes the compiler will do clever things to reduce
|
|
// code size that result in a net slowdown, if it thinks that
|
|
// a variable is not used in a certain location.
|
|
// This macro does its best to convince the compiler that
|
|
// the variable is used in this location, to help control
|
|
// code motion and de-duplication that would result in a slowdown.
|
|
#define FORCE_REFERENCE(var) asm volatile( "" : : "r" (var) )
|
|
|
|
|
|
#define K255 255
|
|
#define K171 171
|
|
#define K170 170
|
|
#define K85 85
|
|
|
|
void hsv2rgb_rainbow( const CHSV& hsv, CRGB& rgb)
|
|
{
|
|
// Yellow has a higher inherent brightness than
|
|
// any other color; 'pure' yellow is perceived to
|
|
// be 93% as bright as white. In order to make
|
|
// yellow appear the correct relative brightness,
|
|
// it has to be rendered brighter than all other
|
|
// colors.
|
|
// Level Y1 is a moderate boost, the default.
|
|
// Level Y2 is a strong boost.
|
|
const uint8_t Y1 = 1;
|
|
const uint8_t Y2 = 0;
|
|
|
|
// G2: Whether to divide all greens by two.
|
|
// Depends GREATLY on your particular LEDs
|
|
const uint8_t G2 = 0;
|
|
|
|
// Gscale: what to scale green down by.
|
|
// Depends GREATLY on your particular LEDs
|
|
const uint8_t Gscale = 0;
|
|
|
|
|
|
uint8_t hue = hsv.hue;
|
|
uint8_t sat = hsv.sat;
|
|
uint8_t val = hsv.val;
|
|
|
|
uint8_t offset = hue & 0x1F; // 0..31
|
|
|
|
// offset8 = offset * 8
|
|
uint8_t offset8 = offset;
|
|
{
|
|
#if defined(__AVR__)
|
|
// Left to its own devices, gcc turns "x <<= 3" into a loop
|
|
// It's much faster and smaller to just do three single-bit shifts
|
|
// So this business is to force that.
|
|
offset8 <<= 1;
|
|
asm volatile("");
|
|
offset8 <<= 1;
|
|
asm volatile("");
|
|
offset8 <<= 1;
|
|
#else
|
|
// On ARM and other non-AVR platforms, we just shift 3.
|
|
offset8 <<= 3;
|
|
#endif
|
|
}
|
|
|
|
uint8_t third = scale8( offset8, (256 / 3)); // max = 85
|
|
|
|
uint8_t r, g, b;
|
|
|
|
if( ! (hue & 0x80) ) {
|
|
// 0XX
|
|
if( ! (hue & 0x40) ) {
|
|
// 00X
|
|
//section 0-1
|
|
if( ! (hue & 0x20) ) {
|
|
// 000
|
|
//case 0: // R -> O
|
|
r = K255 - third;
|
|
g = third;
|
|
b = 0;
|
|
FORCE_REFERENCE(b);
|
|
} else {
|
|
// 001
|
|
//case 1: // O -> Y
|
|
if( Y1 ) {
|
|
r = K171;
|
|
g = K85 + third ;
|
|
b = 0;
|
|
FORCE_REFERENCE(b);
|
|
}
|
|
if( Y2 ) {
|
|
r = K170 + third;
|
|
//uint8_t twothirds = (third << 1);
|
|
uint8_t twothirds = scale8( offset8, ((256 * 2) / 3)); // max=170
|
|
g = K85 + twothirds;
|
|
b = 0;
|
|
FORCE_REFERENCE(b);
|
|
}
|
|
}
|
|
} else {
|
|
//01X
|
|
// section 2-3
|
|
if( ! (hue & 0x20) ) {
|
|
// 010
|
|
//case 2: // Y -> G
|
|
if( Y1 ) {
|
|
//uint8_t twothirds = (third << 1);
|
|
uint8_t twothirds = scale8( offset8, ((256 * 2) / 3)); // max=170
|
|
r = K171 - twothirds;
|
|
g = K170 + third;
|
|
b = 0;
|
|
FORCE_REFERENCE(b);
|
|
}
|
|
if( Y2 ) {
|
|
r = K255 - offset8;
|
|
g = K255;
|
|
b = 0;
|
|
FORCE_REFERENCE(b);
|
|
}
|
|
} else {
|
|
// 011
|
|
// case 3: // G -> A
|
|
r = 0;
|
|
FORCE_REFERENCE(r);
|
|
g = K255 - third;
|
|
b = third;
|
|
}
|
|
}
|
|
} else {
|
|
// section 4-7
|
|
// 1XX
|
|
if( ! (hue & 0x40) ) {
|
|
// 10X
|
|
if( ! ( hue & 0x20) ) {
|
|
// 100
|
|
//case 4: // A -> B
|
|
r = 0;
|
|
FORCE_REFERENCE(r);
|
|
//uint8_t twothirds = (third << 1);
|
|
uint8_t twothirds = scale8( offset8, ((256 * 2) / 3)); // max=170
|
|
g = K171 - twothirds; //K170?
|
|
b = K85 + twothirds;
|
|
|
|
} else {
|
|
// 101
|
|
//case 5: // B -> P
|
|
r = third;
|
|
g = 0;
|
|
FORCE_REFERENCE(g);
|
|
b = K255 - third;
|
|
|
|
}
|
|
} else {
|
|
if( ! (hue & 0x20) ) {
|
|
// 110
|
|
//case 6: // P -- K
|
|
r = K85 + third;
|
|
g = 0;
|
|
FORCE_REFERENCE(g);
|
|
b = K171 - third;
|
|
|
|
} else {
|
|
// 111
|
|
//case 7: // K -> R
|
|
r = K170 + third;
|
|
g = 0;
|
|
FORCE_REFERENCE(g);
|
|
b = K85 - third;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
// This is one of the good places to scale the green down,
|
|
// although the client can scale green down as well.
|
|
if( G2 ) g = g >> 1;
|
|
if( Gscale ) g = scale8_video_LEAVING_R1_DIRTY( g, Gscale);
|
|
|
|
// Scale down colors if we're desaturated at all
|
|
// and add the brightness_floor to r, g, and b.
|
|
if( sat != 255 ) {
|
|
if( sat == 0) {
|
|
r = 255; b = 255; g = 255;
|
|
} else {
|
|
//nscale8x3_video( r, g, b, sat);
|
|
#if (FASTLED_SCALE8_FIXED==1)
|
|
if( r ) r = scale8_LEAVING_R1_DIRTY( r, sat);
|
|
if( g ) g = scale8_LEAVING_R1_DIRTY( g, sat);
|
|
if( b ) b = scale8_LEAVING_R1_DIRTY( b, sat);
|
|
#else
|
|
if( r ) r = scale8_LEAVING_R1_DIRTY( r, sat) + 1;
|
|
if( g ) g = scale8_LEAVING_R1_DIRTY( g, sat) + 1;
|
|
if( b ) b = scale8_LEAVING_R1_DIRTY( b, sat) + 1;
|
|
#endif
|
|
cleanup_R1();
|
|
|
|
uint8_t desat = 255 - sat;
|
|
desat = scale8( desat, desat);
|
|
|
|
uint8_t brightness_floor = desat;
|
|
r += brightness_floor;
|
|
g += brightness_floor;
|
|
b += brightness_floor;
|
|
}
|
|
}
|
|
|
|
// Now scale everything down if we're at value < 255.
|
|
if( val != 255 ) {
|
|
|
|
val = scale8_video_LEAVING_R1_DIRTY( val, val);
|
|
if( val == 0 ) {
|
|
r=0; g=0; b=0;
|
|
} else {
|
|
// nscale8x3_video( r, g, b, val);
|
|
#if (FASTLED_SCALE8_FIXED==1)
|
|
if( r ) r = scale8_LEAVING_R1_DIRTY( r, val);
|
|
if( g ) g = scale8_LEAVING_R1_DIRTY( g, val);
|
|
if( b ) b = scale8_LEAVING_R1_DIRTY( b, val);
|
|
#else
|
|
if( r ) r = scale8_LEAVING_R1_DIRTY( r, val) + 1;
|
|
if( g ) g = scale8_LEAVING_R1_DIRTY( g, val) + 1;
|
|
if( b ) b = scale8_LEAVING_R1_DIRTY( b, val) + 1;
|
|
#endif
|
|
cleanup_R1();
|
|
}
|
|
}
|
|
|
|
// Here we have the old AVR "missing std X+n" problem again
|
|
// It turns out that fixing it winds up costing more than
|
|
// not fixing it.
|
|
// To paraphrase Dr Bronner, profile! profile! profile!
|
|
//asm volatile( "" : : : "r26", "r27" );
|
|
//asm volatile (" movw r30, r26 \n" : : : "r30", "r31");
|
|
rgb.r = r;
|
|
rgb.g = g;
|
|
rgb.b = b;
|
|
}
|
|
|
|
|
|
void hsv2rgb_raw(const struct CHSV * phsv, struct CRGB * prgb, int numLeds) {
|
|
for(int i = 0; i < numLeds; i++) {
|
|
hsv2rgb_raw(phsv[i], prgb[i]);
|
|
}
|
|
}
|
|
|
|
void hsv2rgb_rainbow( const struct CHSV* phsv, struct CRGB * prgb, int numLeds) {
|
|
for(int i = 0; i < numLeds; i++) {
|
|
hsv2rgb_rainbow(phsv[i], prgb[i]);
|
|
}
|
|
}
|
|
|
|
void hsv2rgb_spectrum( const struct CHSV* phsv, struct CRGB * prgb, int numLeds) {
|
|
for(int i = 0; i < numLeds; i++) {
|
|
hsv2rgb_spectrum(phsv[i], prgb[i]);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#define FIXFRAC8(N,D) (((N)*256)/(D))
|
|
|
|
// This function is only an approximation, and it is not
|
|
// nearly as fast as the normal HSV-to-RGB conversion.
|
|
// See extended notes in the .h file.
|
|
CHSV rgb2hsv_approximate( const CRGB& rgb)
|
|
{
|
|
uint8_t r = rgb.r;
|
|
uint8_t g = rgb.g;
|
|
uint8_t b = rgb.b;
|
|
uint8_t h, s, v;
|
|
|
|
// find desaturation
|
|
uint8_t desat = 255;
|
|
if( r < desat) desat = r;
|
|
if( g < desat) desat = g;
|
|
if( b < desat) desat = b;
|
|
|
|
// remove saturation from all channels
|
|
r -= desat;
|
|
g -= desat;
|
|
b -= desat;
|
|
|
|
//Serial.print("desat="); Serial.print(desat); Serial.println("");
|
|
|
|
//uint8_t orig_desat = sqrt16( desat * 256);
|
|
//Serial.print("orig_desat="); Serial.print(orig_desat); Serial.println("");
|
|
|
|
// saturation is opposite of desaturation
|
|
s = 255 - desat;
|
|
//Serial.print("s.1="); Serial.print(s); Serial.println("");
|
|
|
|
if( s != 255 ) {
|
|
// undo 'dimming' of saturation
|
|
s = 255 - sqrt16( (255-s) * 256);
|
|
}
|
|
// without lib8tion: float ... ew ... sqrt... double ew, or rather, ew ^ 0.5
|
|
// if( s != 255 ) s = (255 - (256.0 * sqrt( (float)(255-s) / 256.0)));
|
|
//Serial.print("s.2="); Serial.print(s); Serial.println("");
|
|
|
|
|
|
// at least one channel is now zero
|
|
// if all three channels are zero, we had a
|
|
// shade of gray.
|
|
if( (r + g + b) == 0) {
|
|
// we pick hue zero for no special reason
|
|
return CHSV( 0, 0, 255 - s);
|
|
}
|
|
|
|
// scale all channels up to compensate for desaturation
|
|
if( s < 255) {
|
|
if( s == 0) s = 1;
|
|
uint32_t scaleup = 65535 / (s);
|
|
r = ((uint32_t)(r) * scaleup) / 256;
|
|
g = ((uint32_t)(g) * scaleup) / 256;
|
|
b = ((uint32_t)(b) * scaleup) / 256;
|
|
}
|
|
//Serial.print("r.2="); Serial.print(r); Serial.println("");
|
|
//Serial.print("g.2="); Serial.print(g); Serial.println("");
|
|
//Serial.print("b.2="); Serial.print(b); Serial.println("");
|
|
|
|
uint16_t total = r + g + b;
|
|
|
|
//Serial.print("total="); Serial.print(total); Serial.println("");
|
|
|
|
// scale all channels up to compensate for low values
|
|
if( total < 255) {
|
|
if( total == 0) total = 1;
|
|
uint32_t scaleup = 65535 / (total);
|
|
r = ((uint32_t)(r) * scaleup) / 256;
|
|
g = ((uint32_t)(g) * scaleup) / 256;
|
|
b = ((uint32_t)(b) * scaleup) / 256;
|
|
}
|
|
//Serial.print("r.3="); Serial.print(r); Serial.println("");
|
|
//Serial.print("g.3="); Serial.print(g); Serial.println("");
|
|
//Serial.print("b.3="); Serial.print(b); Serial.println("");
|
|
|
|
if( total > 255 ) {
|
|
v = 255;
|
|
} else {
|
|
v = qadd8(desat,total);
|
|
// undo 'dimming' of brightness
|
|
if( v != 255) v = sqrt16( v * 256);
|
|
// without lib8tion: float ... ew ... sqrt... double ew, or rather, ew ^ 0.5
|
|
// if( v != 255) v = (256.0 * sqrt( (float)(v) / 256.0));
|
|
|
|
}
|
|
|
|
//Serial.print("v="); Serial.print(v); Serial.println("");
|
|
|
|
|
|
#if 0
|
|
|
|
//#else
|
|
if( v != 255) {
|
|
// this part could probably use refinement/rethinking,
|
|
// (but it doesn't overflow & wrap anymore)
|
|
uint16_t s16;
|
|
s16 = (s * 256);
|
|
s16 /= v;
|
|
//Serial.print("s16="); Serial.print(s16); Serial.println("");
|
|
if( s16 < 256) {
|
|
s = s16;
|
|
} else {
|
|
s = 255; // clamp to prevent overflow
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//Serial.print("s.3="); Serial.print(s); Serial.println("");
|
|
|
|
|
|
// since this wasn't a pure shade of gray,
|
|
// the interesting question is what hue is it
|
|
|
|
|
|
|
|
// start with which channel is highest
|
|
// (ties don't matter)
|
|
uint8_t highest = r;
|
|
if( g > highest) highest = g;
|
|
if( b > highest) highest = b;
|
|
|
|
if( highest == r ) {
|
|
// Red is highest.
|
|
// Hue could be Purple/Pink-Red,Red-Orange,Orange-Yellow
|
|
if( g == 0 ) {
|
|
// if green is zero, we're in Purple/Pink-Red
|
|
h = (HUE_PURPLE + HUE_PINK) / 2;
|
|
h += scale8( qsub8(r, 128), FIXFRAC8(48,128));
|
|
} else if ( (r - g) > g) {
|
|
// if R-G > G then we're in Red-Orange
|
|
h = HUE_RED;
|
|
h += scale8( g, FIXFRAC8(32,85));
|
|
} else {
|
|
// R-G < G, we're in Orange-Yellow
|
|
h = HUE_ORANGE;
|
|
h += scale8( qsub8((g - 85) + (171 - r), 4), FIXFRAC8(32,85)); //221
|
|
}
|
|
|
|
} else if ( highest == g) {
|
|
// Green is highest
|
|
// Hue could be Yellow-Green, Green-Aqua
|
|
if( b == 0) {
|
|
// if Blue is zero, we're in Yellow-Green
|
|
// G = 171..255
|
|
// R = 171.. 0
|
|
h = HUE_YELLOW;
|
|
uint8_t radj = scale8( qsub8(171,r), 47); //171..0 -> 0..171 -> 0..31
|
|
uint8_t gadj = scale8( qsub8(g,171), 96); //171..255 -> 0..84 -> 0..31;
|
|
uint8_t rgadj = radj + gadj;
|
|
uint8_t hueadv = rgadj / 2;
|
|
h += hueadv;
|
|
//h += scale8( qadd8( 4, qadd8((g - 128), (128 - r))),
|
|
// FIXFRAC8(32,255)); //
|
|
} else {
|
|
// if Blue is nonzero we're in Green-Aqua
|
|
if( (g-b) > b) {
|
|
h = HUE_GREEN;
|
|
h += scale8( b, FIXFRAC8(32,85));
|
|
} else {
|
|
h = HUE_AQUA;
|
|
h += scale8( qsub8(b, 85), FIXFRAC8(8,42));
|
|
}
|
|
}
|
|
|
|
} else /* highest == b */ {
|
|
// Blue is highest
|
|
// Hue could be Aqua/Blue-Blue, Blue-Purple, Purple-Pink
|
|
if( r == 0) {
|
|
// if red is zero, we're in Aqua/Blue-Blue
|
|
h = HUE_AQUA + ((HUE_BLUE - HUE_AQUA) / 4);
|
|
h += scale8( qsub8(b, 128), FIXFRAC8(24,128));
|
|
} else if ( (b-r) > r) {
|
|
// B-R > R, we're in Blue-Purple
|
|
h = HUE_BLUE;
|
|
h += scale8( r, FIXFRAC8(32,85));
|
|
} else {
|
|
// B-R < R, we're in Purple-Pink
|
|
h = HUE_PURPLE;
|
|
h += scale8( qsub8(r, 85), FIXFRAC8(32,85));
|
|
}
|
|
}
|
|
|
|
h += 1;
|
|
return CHSV( h, s, v);
|
|
}
|
|
|
|
// Examples that need work:
|
|
// 0,192,192
|
|
// 192,64,64
|
|
// 224,32,32
|
|
// 252,0,126
|
|
// 252,252,0
|
|
// 252,252,126
|
|
|
|
FASTLED_NAMESPACE_END
|