.gitignore

@@ -3,4 +3,3 @@
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/ipch
-include/config.h

README.md

@@ -1,43 +0,0 @@
-# ESPleaf
-
-## Layout description
-
-Layout is defined in `LAYOUT` in `config.h`.
-
-LEDs within a node are supposed to be installed counter-clockwise. The edge where the cables enter the node is node 0. To its right (counter-clockwise, remember) is corner 0. Then edge 1, corner 1, edge 2, corner 2 before coming back to edge 0.
-
-Thereby, the next panel can either be installed along edge 1 or edge 2. (But the cable has to go corner 0, corner 1, corner 2 first.)
-
-First panel is ignored in `LAYOUT`. First entry in `LAYOUT` is the edge through which the cable leaves Node 0 to Node 1 - which can be either Edge 1 or Edge 2.
-
-On the next panel, the edge the cable is coming through is called Edge 0 again. And so on.
-
-So, `LAYOUT` countains a list of edges the cable takes to leave to the next node.
-
-## Commands
-
-Command can be sent via MQTT to `MQTT_TOPIC_COMMANDS`. Syntax is `key=value` or `key=value&key2=value2...`.
-
-Valid keys are:
-* `mode` sets a new mode. Valid modes are:
-  * `corners`
-  * `nodes`
-  * `first_corner`
-  * `first_node`
-  * `flash`
-  * `static`
-  * `off`
-* `brightness` sets the overall brightness of the lamp. Values are from 0 to 255 inclusive.
-* `duration` if sets, `mode` and `brightness` are set for this amount of seconds only.
-* `color` sets the color for `static` and `flash` modes. A predefined color name is expected.
-* `speedup` sets a speedup for faster animations. Default value 1, possible values are 1 to 255. 0 will lead to an exception.
-
-## Startup sequence
-
-During startup:
-* 1 green corner: FastLED is initialized.
-* 2 green corners: WiFi is connecting...
-* 3 green corners: Layout is analyzed...
-* 4 green corners: Connecting to MQTT server...
-* 5 green corners (only if OTA_DELAY is set): Waiting for an OTA connection...
-* Everything green (quarter of a second): Initialization done.

include/config.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#define CORNERS_PER_PART 3
+#define LEDS_PER_CORNER 2
+
+// Layout definition
+// Every node has EDGES_PER_PART corners and edges.
+// The edge the signal comes in is edge number 0.
+// All other edges are numbered counter-clockwise.
+// LAYOUT contains a list of edges the signal takes.
+// First node is implied.
+
+// Examples, assuming EDGES_PER_PART == 3:
+// Example: Nodes arranged in a circle: {1, 2, 2, 2, 2}
+// Example: Nodes arranged in a line: {1, 2, 1, 2, 1, 2}
+#define NODE_COUNT 5
+#define LAYOUT {2, 1, 1, 2}
+
+#define LED_COUNT NODE_COUNT * CORNERS_PER_PART * LEDS_PER_CORNER
+
+#define SPEEDUP 1
+
+//#define TEST_MODE

include/config.sample.h

@@ -1,49 +0,0 @@
-#pragma once
-
-#define CORNERS_PER_PART 3
-#define LEDS_PER_CORNER 2
-
-// Layout definition
-// Every node has EDGES_PER_PART corners and edges.
-// The edge the signal comes in is edge number 0.
-// All other edges are numbered counter-clockwise.
-// LAYOUT contains a list of edges the signal takes.
-// First node is implied.
-
-// Examples, assuming EDGES_PER_PART == 3:
-// Example: Nodes arranged in a circle: {1, 2, 2, 2, 2}
-// Example: Nodes arranged in a line: {1, 2, 1, 2, 1, 2}
-#define NODE_COUNT 5
-#define LAYOUT {2, 1, 1, 2}
-
-#define LED_COUNT NODE_COUNT * CORNERS_PER_PART * LEDS_PER_CORNER
-
-#define SPEEDUP 1
-
-#define MAX_MILLIAMPS 1000
-// Maximum color difference for the random effects.
-// This changes the hue value +/- this value. Use a maximum value of 127, otherwise strange things might happen.
-#define COLOR_DIFFERENCE 25
-// If this is enabled, the node layout will be visualized at startup.
-#define SHOW_LAYOUT_AT_BOOT
-// Wait this many seconds for OTA requests during startup.
-#define WAIT_FOR_OTA 5
-
-#define WIFI_SSID "..."
-#define WIFI_PASS "..."
-
-#define OTA_HOSTNAME "..."
-
-#define MQTT_CLIENT_ID "espleaf"
-#define MQTT_USER "..."
-#define MQTT_PASS "..."
-#define MQTT_SERVER "..."
-#define MQTT_SERVER_PORT 1883
-#define MQTT_TOPIC_STATE "espleaf/state"
-#define MQTT_TOPIC_STATE_LONG "espleaf/state_long"
-#define MQTT_TOPIC_COMMANDS "esplead/cmnd"
-
-#define SYSLOG_HOST "..."
-#define SYSLOG_PORT 514
-
-//#define TEST_MODE

include/corner.h

@@ -1,17 +1,14 @@
 #pragma once
-
-class Corner;
-
 #include "my_fastled.h"
 #include <vector>
 #include <list>
-#include "node.h"
+#include "edge.h"
 
 class Corner {
 	public:
-	Node* node;
-	uint8_t number;
-	Corner(Node* node, uint8_t number);
+	Edge* e1;
+	Edge* e2;
+	Corner(Edge* e1, Edge* e2);
 	std::list<uint16_t> _leds;
 	std::vector<Corner*> _long_neighbours {};
 	std::vector<Corner*> _short_neighbours {};
@@ -19,19 +16,19 @@ class Corner {
 	CRGB source_color;
 	CRGB target_color;
 	bool effect_running = false;
-	uint16_t color_blend_state = 1023;
+	uint8_t color_blend_state = 255;
 	uint16_t effect_id;
-	uint16_t effect_speed;
+	uint8_t effect_speed;
 	//bool loop();
 	void draw();
 	void blend_to(CRGB color, uint16_t effect_id=0, uint8_t effect_speed=0);
 	void add_led(uint16_t led_id);
 	void merge_leds(Corner* c);
 	void step();
-	void infect(uint16_t short_level, uint16_t long_level);
+	void infect(uint8_t short_level, uint8_t long_level);
 	bool is_finished();
 	void set_color(CRGB color);
-	bool reached_level(uint16_t level);
+	bool reached_level(uint8_t level);
 
 	private:
 	void _infect(std::vector<Corner*>* neighbours);

include/edge.h

@@ -0,0 +1,6 @@
+#pragma once
+
+class Edge {
+	public:
+	Edge* neighbour = nullptr;
+};

include/mqtt.h

@@ -1,11 +0,0 @@
-#pragma once
-
-#include "wifi.h"
-#include "config.h"
-#include <PubSubClient.h>
-
-static PubSubClient mqtt(wifi);
-
-void mqtt_setup();
-void mqtt_loop();
-void mqtt_publish_current_state(String state);

include/node.h

@@ -1,36 +1,22 @@
 #pragma once
-
-class Node;
-
 #include <Arduino.h>
 #include "config.h"
+#include "edge.h"
 #include "corner.h"
-#include "prototypes.h"
-
-// Delta-X data. Per direction of a triangle is a triple with Delta-X values for each direction.
-static const int8_t dx[][3] = {{0, 1, -1}, {1, 0, -1}, {1, -1, 0}, {0, -1, 1}, {-1, 0, 1}, {-1, 1, 0}};
-static const int8_t dy[][3] = {{-1, 0, 0}, {0, 1, 0}, {0, 0, -1}, {1, 0, 0}, {0, -1, 0}, {0, 0, 1}};
-
-typedef struct {
-	int8_t x;
-	int8_t y;
-} Coords;
 
 class Node {
-	public:
+	private:
 		uint16_t _number;
-		Coords coords;
-		uint8_t direction;
+	public:
 		Node* neighbours[CORNERS_PER_PART];
+		Edge* edges[CORNERS_PER_PART];
 		Corner* _corners[CORNERS_PER_PART];
-		Node(uint16_t number, Coords c, uint8_t direction);
+		Node(uint16_t number);
 		Node* create_neighbour(uint8_t edge);
-		Coords coords_at_direction(uint8_t edge);
-		uint16_t distance_from_start = 0;
 
 		void blend_to(CRGB color, uint16_t effect_id=0, uint8_t effect_speed=0);
 		void set_color(CRGB color);
-		void infect(uint16_t level);
+		void infect(uint8_t level);
 		void step();
 		void draw();
 };

include/prototypes.h

@@ -2,36 +2,19 @@
 #include "my_fastled.h"
 #include <list>
 #include <vector>
-#include <map>
 #include "config.h"
 #include "node.h"
+#include "edge.h"
 #include "corner.h"
 
-class Node;
 
 extern std::vector<Node*> nodes;
+extern std::list<Edge*> edges;
 extern std::vector<Corner*> corners;
 
 extern CRGB leds[LED_COUNT];
-extern CRGB color;
 
 enum AnimationMode {
 	AM_CORNERS,
-	AM_FIRST_CORNER,
-	AM_NODES,
-	AM_FIRST_NODE,
-	AM_FLASH,
-	AM_OFF,
-	AM_ERROR,
-	AM_NONE,
-	AM_STATIC,
-	AM_RAINBOW
-};
-
-extern std::map<AnimationMode, const char*> animation_mode_names;
-
-extern AnimationMode mode;
-extern AnimationMode temp_mode;
-extern unsigned long temp_mode_until;
-extern int return_to_brightness;
-extern uint8_t speedup;
+	AM_NODES
+};

include/state.h

@@ -1,27 +0,0 @@
-#pragma once
-#include <Arduino.h>
-#include <ArduinoJson.h>
-#include "prototypes.h"
-
-class State {
-    AnimationMode _mode = AM_NONE;
-    uint16_t _duration = 0;
-    int16_t _brightness = -1;
-    uint8_t _speedup = 0;
-    CRGB _color = CRGB::Black;
-
-    public:
-    void parse_json(char* str);
-    void set(String key, String value);
-    void commit();
-    static void publish_current_state();
-    static AnimationMode get_active_mode();
-
-    void parse_state(String state);
-    void parse_mode(String mode);
-    void set_mode(AnimationMode mode);
-    void set_duration(uint16_t duration);
-    void set_brightness(uint8_t brightness);
-    void set_color(JsonObject rgb);
-    void set_speedup(uint8_t speedup);
-};

include/syslog.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Arduino.h>
-#include <WiFiUdp.h>
-
-#ifdef SYSLOG_HOST
-	void syslog(String msg, uint8_t severity=7);
-#endif

include/tools.h

@@ -1,15 +1,8 @@
 #pragma once
 #include "my_fastled.h"
-#include "syslog.h"
 
-//#define LOG(...) Serial.printf(__VA_ARGS__)
-//#define LOGln(...) Serial.printf(__VA_ARGS__); Serial.println()
-
-#ifdef SYSLOG_HOST
-	#define LOGln(...) { char buffer[512]; snprintf(buffer, 512, __VA_ARGS__); syslog(buffer); Serial.println(buffer);}
-#else
-	#define LOGln(...) Serial.printf(__VA_ARGS__); Serial.println()
-#endif
+#define LOG(...) Serial.printf(__VA_ARGS__)
+#define LOGln(...) Serial.printf(__VA_ARGS__); Serial.println()
 
 
 void clear_leds();

include/wifi.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <ESP8266WiFi.h>
-#include "config.h"
-
-static WiFiClient wifi;
-
-void wifi_setup();

platformio.ini

@@ -12,13 +12,9 @@
 platform = espressif8266
 board = d1_mini
 framework = arduino
-;upload_port = /dev/cu.wchusbserial*
-upload_protocol = espota
-upload_port = espleaf-prod.local
+upload_port = /dev/cu.wchusbserial*
 upload_speed = 921600
 monitor_port = /dev/cu.wchusbserial*
 monitor_speed = 74880
 monitor_filters = default, time, send_on_enter, esp8266_exception_decoder
-lib_deps = fastled/FastLED @ 3.4.0
-    PubSubClient @ 2.8
-    ArduinoJson
+lib_deps = FastLED

src/corner.cpp

@@ -2,7 +2,7 @@
 #include "prototypes.h"
 #include "tools.h"
 
-Corner::Corner(Node* no, uint8_t nu): node(no), number(nu) {
+Corner::Corner(Edge* new_e1, Edge* new_e2): e1(new_e1), e2(new_e2) {
 
 }
 
@@ -20,16 +20,16 @@ void Corner::_infect(std::vector<Corner*>* neighbours) {
 }
 
 void Corner::step() {
-	if (this->color_blend_state < 1024) {
-		this->color = blend(this->source_color, this->target_color, color_blend_state>>2);
-		this->color_blend_state = (this->color_blend_state + effect_speed > 1024) ? 1024 : this->color_blend_state + effect_speed;
-		if (this->color_blend_state==1024) {
+	if (this->color_blend_state < 255) {
+		this->color = blend(this->source_color, this->target_color, color_blend_state);
+		this->color_blend_state = (this->color_blend_state + effect_speed > 255) ? 255 : this->color_blend_state + effect_speed;
+		if (this->color_blend_state==255) {
 			this->color = this->target_color;
 		}
 	}
 }
 
-void Corner::infect(uint16_t infect_short_level, uint16_t infect_long_level) {
+void Corner::infect(uint8_t infect_short_level, uint8_t infect_long_level) {
 	if (reached_level(infect_short_level)) {
 		_infect(&_short_neighbours);
 	}
@@ -38,29 +38,53 @@ void Corner::infect(uint16_t infect_short_level, uint16_t infect_long_level) {
 	}
 }
 
-bool Corner::reached_level(uint16_t level) {
-	if (color_blend_state >= 1024) return false;
-	uint16_t old_cbs = color_blend_state >= effect_speed ? color_blend_state - effect_speed : 0;
+bool Corner::reached_level(uint8_t level) {
+	uint8_t old_cbs = color_blend_state >= effect_speed ? color_blend_state - effect_speed : 0;
 	return (old_cbs < level && color_blend_state >= level);
 }
 
+/*bool Corner::loop() {
+	if (this->color_blend_state < 255) {
+		this->color = blend(this->source_color, this->target_color, color_blend_state);
+		if (255 - color_blend_state >= effect_speed) {
+			color_blend_state += effect_speed;
+		} else {
+			color_blend_state = 255;
+		}
+		
+		if (color_blend_state >= 200 && color_blend_state-effect_speed<200) {
+			infect(&_long_neighbours);
+		}
+
+		if (color_blend_state>=75 && color_blend_state-effect_speed<75) {
+			infect(&_short_neighbours);
+		}
+
+		if (color_blend_state==255) {
+			this->color = this->target_color;
+		}
+	}
+
+	this->draw();
+
+	return color_blend_state < 255;
+}*/
+
 void Corner::blend_to(CRGB target, uint16_t eid, uint8_t effect_speed) {
-	//LOGln("blendTo called. Corner: %p, target: %d,%d,%d, eid: %d, 'old' effect_id: %d, speed: %d", this, target.r, target.g, target.b, eid, effect_id, effect_speed);
+	LOGln("blendTo called. Corner: %p, target: %d,%d,%d, eid: %d, 'old' effect_id: %d, speed: %d", this, target.r, target.g, target.b, eid, effect_id, effect_speed);
 	if (eid==0) {
 		this->effect_id = random16();
-		//LOGln("Set effect_id to %d", this->effect_id);
+		LOGln("Set effect_id to %d", this->effect_id);
 	} else {
 		if (this->effect_id == eid) {
-			//LOGln("'Old' effect. Doing nothing.");
+			LOGln("'Old' effect. Doing nothing.");
 			return;
 		}
 		this->effect_id = eid;
 	}
 
 	if (effect_speed==0) {
-		// Effect speed 2 - 7.
-		// Speed 7 @ 50fps => 3 seconds
-		effect_speed = random8(6) + 2;
+		effect_speed = random8(3) + 1;
 	}
 	this->effect_speed = effect_speed;
 	
@@ -80,10 +104,10 @@ void Corner::merge_leds(Corner* c) {
 }
 
 bool Corner::is_finished() {
-	return color_blend_state < 1024;
+	return color_blend_state < 255;
 }
 
 void Corner::set_color(CRGB color) {
 	this->color = color;
-	this->color_blend_state = 1024;
+	this->color_blend_state = 255;
 }

src/main.cpp

@@ -1,29 +1,20 @@
 #include <Arduino.h>
 #include <ESP8266WiFi.h>
-#include <ArduinoOTA.h>
 #include "my_fastled.h"
 #include "config.h"
 #include "tools.h"
 #include "node.h"
+#include "edge.h"
 #include "corner.h"
 #include "prototypes.h"
-#include "mqtt.h"
-#include "state.h"
-#include "syslog.h"
 
 std::vector<Node*> nodes;
+std::list<Edge*> edges;
 std::vector<Corner*> corners;
 
 CRGB leds[LED_COUNT];
-CRGB color = CRGB::Pink;
 
 AnimationMode mode = AM_CORNERS;
-AnimationMode temp_mode;
-unsigned long temp_mode_until;
-int return_to_brightness = -1;
-uint8_t speedup = SPEEDUP;
-
-unsigned long last_loop = 0;
 
 #ifdef TEST_MODE
 	uint8_t base_hue = 0;
@@ -34,8 +25,7 @@ bool looping;
 void setup_layout() {
 	LOGln("Setting up layout...");
 	uint8_t layout[] = LAYOUT;
-	Node* current_node = new Node(0, {0, 0}, 0);
-	current_node->distance_from_start = 1;
+	Node* current_node = new Node(0);
 	nodes.push_back(current_node);
 
 	for(uint16_t i=0; i<NODE_COUNT-1; i++) {
@@ -43,85 +33,32 @@ void setup_layout() {
 		nodes.push_back(current_node);
 	}
 
-	bool verbose = false;
-	for (Node* n1 : nodes) {
-		if (verbose) LOGln("Looking for neighbours of node #%d @ %d,%d", n1->_number, n1->coords.x, n1->coords.y);
-		for(int edge=0; edge<CORNERS_PER_PART; edge++) {
-			Coords c = n1->coords_at_direction(edge);
-			if (verbose) LOGln("  Checking edge %d @ %d,%d...", edge, c.x, c.y);
-
-			Node* found = nullptr;
-			for(Node* n2 : nodes) {
-				if (n2 == n1) {
-					continue;
-				}
-				if (n2->coords.x == c.x && n2->coords.y == c.y) {
-					found = n2;
-					break;
-				}
-			}
-			if (found != nullptr) {
-				if (verbose) LOGln("    Found node #%d", found->_number);
-				uint8_t inverse_dir = (n1->direction + 2*edge + 3) % 6;
-				int8_t e = (inverse_dir - found->direction) % 6;
-				if (e < 0) e+=6;
-				e = e / 2;
-				//LOGln("      inverse_dir: %d, edge: %d", inverse_dir, edge);
-				int8_t e1 = (edge - 1) % CORNERS_PER_PART;
-				if (e1<0) e1+=CORNERS_PER_PART;
-				int8_t e2 = (e - 1) % CORNERS_PER_PART;
-				if (e2<0) e2+=CORNERS_PER_PART;
-
-				if (verbose) LOGln("      Mapping Corner #%d,%d with #%d,%d", n1->_number, edge, found->_number, e2);
-				n1->_corners[edge]->_short_neighbours.push_back(found->_corners[e2]);
-				
-				if (verbose) LOGln("      Mapping Corner #%d,%d with #%d,%d", n1->_number, e1, found->_number, e);
-				n1->_corners[e1]->_short_neighbours.push_back(found->_corners[e]);
-			} else {
-				if (verbose) LOGln("    No match.");
+	for(Node* node: nodes) {
+		for(Edge* edge: node->edges) {
+			auto e = std::find(edges.begin(), edges.end(), edge);
+			if (e == edges.end()) {
+				edges.push_back(edge);
 			}
 		}
+		LOGln("Node %p:", node);
+		for(Node* n : node->neighbours) {
+			LOGln("  %p", n);
+		}
 	}
 
-	bool checked_all = false;
-	while (!checked_all) {
-		checked_all = true;
-		for(Node* n : nodes) {
-			if (n->distance_from_start == 0) {
-				checked_all = false;
-			} else {
-				for(int i=0; i<CORNERS_PER_PART; i++) {
-					if (n->neighbours[i] != nullptr && (n->neighbours[i]->distance_from_start==0 || n->neighbours[i]->distance_from_start > n->distance_from_start)) {
-						n->neighbours[i]->distance_from_start = n->distance_from_start+1;
-					}
-				}
-			}
+	for(Corner* corner: corners) {
+		LOGln("Corner %p:", corner);
+		for(auto c: corner->_long_neighbours) {
+			LOGln("  Long:  %p", c);
 		}
-	}
-
-	for (Node* node : nodes) {
-		LOGln("Node #%d:", node->_number);
-		LOGln("  Distance from start: %d", node->distance_from_start);
-		for(Corner* corner : node->_corners) {
-			LOGln("  Corner #%d,%d:", node->_number, corner->number);
-			for (auto c: corner->_long_neighbours) {
-				LOGln("    Long neighbour:  #%d,%d", c->node->_number, c->number);
-			}
-			for (auto c: corner->_short_neighbours) {
-				LOGln("    Short neighbour: #%d,%d", c->node->_number, c->number);
-			}
-		}
-		for (int i=0; i<CORNERS_PER_PART; i++) {
-			if (node->neighbours[i]==nullptr) {
-				LOGln("  Neighbour %d: -", i);
-			} else {
-				LOGln("  Neighbour %d: #%d", i, node->neighbours[i]->_number);
-			}
+		for(auto c: corner->_short_neighbours) {
+			LOGln("  Short: %p", c);
 		}
 	}
 
 	LOGln("Counts:");
 	LOGln("Nodes:   %3d", nodes.size());
+	LOGln("Edges:   %3d", edges.size());
 	LOGln("Corners: %3d", corners.size());
 }
 
@@ -132,102 +69,36 @@ void setup_fastled() {
 	FastLED.addLeds<WS2812B, 5, GRB>(leds, LEDS_PER_CORNER * CORNERS_PER_PART * NODE_COUNT).setCorrection(TypicalLEDStrip);
 	LOGln("LEDs:    %3d", LED_COUNT);
 	FastLED.setBrightness(255);
-	//FastLED.setDither(DISABLE_DITHER);
-	FastLED.setMaxPowerInVoltsAndMilliamps(5, MAX_MILLIAMPS);
+	FastLED.setDither(DISABLE_DITHER);
 	set_all_leds(CRGB::Black);
 }
 
-void show_all() {
-	for(Node* node : nodes) {
-		node->draw();
-	}
-	FastLED.show();
-}
-
-void show_status(uint8_t status, CRGB color=CRGB::Green) {
-	for (int i=0; i<status*LEDS_PER_CORNER && i<LED_COUNT; i++) {
-		leds[i] = color;
-	}
-	
-	for (int i=status*LEDS_PER_CORNER; i<LED_COUNT; i++) {
-		leds[i] = CRGB::Black;
-	}
-	FastLED.show();
-}
-
-void display_layout() {
-	for(Corner* corner : corners) {
-		corner->set_color(CRGB::Blue);
-		for(Corner* c : corner->_short_neighbours) {
-			c->set_color(CRGB::Red);
-		}
-		for(Corner* c : corner->_long_neighbours) {
-			c->set_color(CRGB::Green);
-		}
-		show_all();
-		delay(1500);
-		for(Corner* c : corners) {
-			c->set_color(CRGB::Black);
-		}
+void setup_wifi() {
+	LOGln("Starting WiFi scan for RNG initialization...");
+	WiFi.mode(WIFI_STA);
+	WiFi.disconnect();
+	uint16_t seed = 0;
+	int n = WiFi.scanNetworks();
+	LOGln("%d WiFi networks found", n);
+	for(int i=0; i<n; i++) {
+		LOGln("  %s, %d dB", WiFi.SSID(i).c_str(), WiFi.RSSI(i));
+		seed = (seed << 2) | (WiFi.RSSI(i) & 0x03);
 	}
+	LOGln("WiFi scan done. Generated seed is 0x%04x", seed);
+	random16_set_seed(seed);
 }
 
 void setup() {
 	Serial.begin(74880);
 	LOGln("ESPleaf starting.");
 
-	
+	setup_layout();
 	setup_fastled();
-	show_status(1);
+	setup_wifi();
 
 	#ifdef TEST_MODE
 		LOGln("TEST_MODE is active!");
-	#else
-		show_status(2);
-		wifi_setup();
-
-		show_status(3);
-		setup_layout();
-
-		show_status(4);
-		mqtt_setup();
-		ArduinoOTA.setHostname(OTA_HOSTNAME);
-		ArduinoOTA.onProgress([&](unsigned int progress, unsigned int total){
-			uint8_t count = progress * corners.size() / total;
-			show_status(count, CRGB::Blue);
-		});
-		ArduinoOTA.onEnd([](){ show_status(0); });
-		ArduinoOTA.begin();
-
-		#ifdef WAIT_FOR_OTA
-			show_status(5);
-			LOGln("Waiting %d seconds for OTA requests...", WAIT_FOR_OTA);
-			unsigned long ota_target_time = millis() + WAIT_FOR_OTA*1000;
-			while (millis() < ota_target_time) {
-				ArduinoOTA.handle();
-				yield();
-			}
-			LOGln("Done waiting for OTA requests.");
-		#endif
-
-		show_status(255);
-		delay(250);
-		show_status(0);
 	#endif
-
-	LOGln("Setup done.");
-
-	#ifdef SHOW_LAYOUT_AT_BOOT
-		LOGln("SHOW_LAYOUT_AT_BOOT is active - showing layout...");
-		display_layout();
-		LOGln("Showing layout is done.");
-	#endif
-
-	for(Corner* corner : corners) {
-		corner->set_color(CRGB::Black);
-	}
-
-	State::publish_current_state();
 }
 
 void loop() {
@@ -245,72 +116,33 @@ void loop() {
 		}
 	#else
 		// Normal mode
-		mqtt_loop();
-		ArduinoOTA.handle();
-
-		if (speedup > 0 && (millis() - last_loop > (20 / speedup) || last_loop > millis())) {
+		EVERY_N_MILLISECONDS(40 / SPEEDUP) {
 			looping = false;
 
-			AnimationMode active_mode = State::get_active_mode();
-
-			if (active_mode == AM_CORNERS || active_mode == AM_FIRST_CORNER) {
+			if (mode == AM_CORNERS) {
 				for(Corner* corner: corners) {
 					corner->step();
-					if (active_mode == AM_FIRST_CORNER) {
-						corner->infect(512, 512);
-					} else {
-						corner->infect(300, 600);
-					}
+					corner->infect(75, 200);
 					looping |= !corner->is_finished();
+					corner->draw();
 				}
 
 				if (random8(128)==0) {
-					uint16_t corner = (active_mode == AM_FIRST_CORNER) ? 0 : random16(corners.size());
-					CHSV color = rgb2hsv_approximate(corners[corner]->color);
-					corners[corner]->blend_to(CHSV(color.h - COLOR_DIFFERENCE + random8(2*COLOR_DIFFERENCE), 255, 255));
+					corners[random16(corners.size())]->blend_to(CHSV(random8(), 255, 255));
 				}
-			} else if (active_mode == AM_NODES || active_mode == AM_FIRST_NODE) {
+			} else if (mode == AM_NODES) {
 				for(Node* node : nodes) {
 					node->step();
-					node->infect(512);
+					node->infect(128);
+					node->draw();
 				}
 
 				if (random8(128)==0) {
-					uint16_t corner = (active_mode == AM_FIRST_NODE) ? 0 : random8(nodes.size());
-					CHSV color = rgb2hsv_approximate(corners[corner]->color);
-					nodes[corner]->blend_to(CHSV(color.h - COLOR_DIFFERENCE + random8(2*COLOR_DIFFERENCE), 255, 255));
+					nodes[random8(nodes.size())]->blend_to(CHSV(random8(), 255, 255));
 				}
-			} else if (active_mode == AM_FLASH) {
-				for (Node* node : nodes) {
-					node->step();
-					node->infect(512);
-				}
-
-				if (millis() / 1000 > last_loop / 1000) {
-					nodes[0]->blend_to(((millis() / 1000) % 2 == 0) ? CRGB::Black : color, 0, 64);
-				}
-
-			} else if (active_mode == AM_OFF || active_mode == AM_STATIC) {
-				for(Node* node : nodes) {
-					node->set_color(active_mode == AM_OFF ? CRGB::Black : color);
-				}
-			} else if (active_mode == AM_RAINBOW) {
-				const uint8_t speed = 5; // seconds (approx.) for full color sweep
-				const uint8_t diff_per_node = 5;
-				uint8_t base_hue = (millis() * 256 / speed) / 1000;
-				for(Node* node : nodes) {
-					node->set_color(CHSV(base_hue + diff_per_node * node->distance_from_start, 255, 255));
-				}
-			} else { // This includes AM_ERROR
-				for(Node* node : nodes) {
-					node->set_color(CRGB::Black);
-				}
-				nodes[0]->set_color(CRGB::Red);
 			}
-
-			last_loop = millis();
 		}
 	#endif
 
-	show_all();
+	FastLED.show();
 }

src/mqtt.cpp

@@ -1,79 +0,0 @@
-#include "mqtt.h"
-#include "tools.h"
-#include "prototypes.h"
-#include "state.h"
-
-void connect() {
-LOGln("Connecting to MQTT broker...");
-    if (mqtt.connect(MQTT_CLIENT_ID, MQTT_USER, MQTT_PASS, MQTT_TOPIC "available", 0, true, "offline")) {
-        LOGln("Connected.");
-        mqtt.publish(MQTT_TOPIC "available", "online", true);
-        char buffer[40];
-        snprintf(buffer, 40, "online %s", wifi.localIP().toString().c_str());
-        mqtt.publish(MQTT_TOPIC "available_long", buffer, true);
-        mqtt.subscribe(MQTT_TOPIC "cmnd");
-        String discovery_msg = "{"
-            "\"~\":\"" MQTT_TOPIC "\",\"avty_t\":\"~available\",\"cmd_t\":\"~cmnd\",\"stat_t\":\"~state\","
-            "\"name\":\"ESPleaf\",\"schema\":\"json\","
-            "\"brightness\":true,\"bri_scl\":255,"
-            "\"effect\":true,\"effect_list\":[\"off\",\"corners\",\"nodes\",\"flash\",\"static\"],"
-            "\"rgb\":true}";
-
-        mqtt.publish("homeassistant/light/" HOMEASSISTANT_OBJECT_ID "/config", discovery_msg.c_str(), true);
-    } else {
-        LOGln("Connection failed. Reason: %d", mqtt.state());
-        delay(1000);
-    }
-}
-
-void callback(char* topic, byte* pl, unsigned int length) {
-    pl[length] = 0;
-    State s;
-    if (pl[0]=='{') {
-        s.parse_json((char*)pl);
-    } else {
-        String payload((char*)pl);
-        // Syntax: key=value&key2=value2...
-        String current_part;
-        LOGln("Received command %s", payload.c_str());
-        while (payload.length() > 0) {
-            int offset = payload.indexOf("&");
-            if (offset != -1) {
-                current_part = payload.substring(0, offset);
-                payload = payload.substring(offset + 1);
-            } else {
-                current_part = payload;
-                payload = "";
-            }
-            offset = current_part.indexOf("=");
-            if (offset==-1) {
-                LOGln("Parameter without '=' detected: %s", current_part.c_str());
-                continue;
-            }
-            String key = current_part.substring(0, offset);
-            String value = current_part.substring(offset+1);
-            s.set(key, value);
-        }
-    }
-    s.commit();
-}
-
-void mqtt_setup() {
-    mqtt.setServer(MQTT_SERVER, MQTT_SERVER_PORT);
-    mqtt.setCallback(callback);
-    mqtt.setSocketTimeout(1);
-    mqtt.setBufferSize(400);
-    connect();
-}
-
-void mqtt_loop() {
-    if (!mqtt.connected()) {
-        LOGln("MQTT disconnected. Reason: %d", mqtt.state());
-        connect();
-    }
-    mqtt.loop();
-}
-
-void mqtt_publish_current_state(String state) {
-    mqtt.publish(MQTT_TOPIC "state", state.c_str(), true);
-};

src/node.cpp

@@ -2,19 +2,15 @@
 #include "prototypes.h"
 #include "tools.h"
 
-Node::Node(uint16_t number, Coords c, uint8_t _dir) {
+Node::Node(uint16_t number) {
 	_number = number;
-	coords = c;
-	direction = _dir;
-
-	LOGln("Created Node #%d at coordinates %d,%d with direction %d.", _number, coords.x, coords.y, direction);
 	for(int i=0; i<CORNERS_PER_PART; i++) {
-		neighbours[i] = nullptr;
+		edges[i] = new Edge();
 	}
 
 	Corner* last_corner = nullptr;
 	for(int i=0; i<CORNERS_PER_PART; i++) {
-		Corner* c = new Corner(this, i);
+		Corner* c = new Corner(edges[i], edges[(i+1) % CORNERS_PER_PART]);
 		for(int j=0; j<LEDS_PER_CORNER; j++) {
 			c->add_led(number * CORNERS_PER_PART * LEDS_PER_CORNER + i * LEDS_PER_CORNER + j);
 		}
@@ -30,22 +26,38 @@ Node::Node(uint16_t number, Coords c, uint8_t _dir) {
 	last_corner->_long_neighbours.push_back(_corners[0]);
 }
 
-Coords Node::coords_at_direction(uint8_t edge) {
-	return {(int8_t)(coords.x + dx[direction][edge]), (int8_t)(coords.y + dy[direction][edge])};
-}
-
 Node* Node::create_neighbour(uint8_t edge) {
-	Coords new_c = coords_at_direction(edge);
-	int8_t new_dir = (edge==1) ? ((direction - 1) % 6) : ((direction + 1) % 6);
-	if (new_dir < 0) new_dir+=6;
-	Node* node = new Node(_number + 1, new_c, new_dir);
+	Node* node = new Node(_number + 1);
 	node->neighbours[0] = this;
 	neighbours[edge] = node;
 
+	node->edges[0]->neighbour = this->edges[edge];
+	this->edges[edge]->neighbour = node->edges[0];
+
+	node->_corners[0]->_short_neighbours.push_back(_corners[(edge-1) % CORNERS_PER_PART]);
+	node->_corners[CORNERS_PER_PART - 1]->_short_neighbours.push_back(_corners[edge]);
+	_corners[(edge-1) % CORNERS_PER_PART]->_short_neighbours.push_back(node->_corners[0]);
+	_corners[edge]->_short_neighbours.push_back(node->_corners[CORNERS_PER_PART - 1]);
+
+	/*
+	delete node->edges[0];
+	node->edges[0] = this->edges[edge];
+	
+	Corner* c = this->corners[(edge-1) % CORNERS_PER_PART];
+	c->merge_leds(node->corners[0]);
+	delete node->corners[0];
+	node->corners[0] = c;
+
+	c = this->corners[edge];
+	c->merge_leds(node->corners[CORNERS_PER_PART-1]);
+	delete node->corners[CORNERS_PER_PART-1];
+	node->corners[CORNERS_PER_PART-1] = c;
+	*/
 	return node;
 }
 
 void Node::blend_to(CRGB color, uint16_t effect_id, uint8_t effect_speed) {
+	LOGln("Node::blend_to called. this:%p", this);
 	if (effect_speed == 0) effect_speed = random8(2)+1;
 	if (effect_id == 0) effect_id = random16();
 	for(Corner* corner : this->_corners) {
@@ -71,7 +83,7 @@ void Node::set_color(CRGB color) {
 	}
 }
 
-void Node::infect(uint16_t level) {
+void Node::infect(uint8_t level) {
 	if (this->_corners[0]->reached_level(level)) {
 		for (Node* neighbour : neighbours) {
 			if (neighbour == nullptr) continue;

src/prototypes.cpp

@@ -1,14 +0,0 @@
-#include "prototypes.h"
-
-std::map<AnimationMode, const char*> animation_mode_names { 
-    {AM_CORNERS, "corners"},
-    {AM_FLASH, "flash"},
-    {AM_FIRST_CORNER, "first_corner"},
-	{AM_NODES, "nodes"},
-	{AM_FIRST_NODE, "first_node"},
-	{AM_OFF, "off"},
-	{AM_ERROR, "error"},
-	{AM_NONE, "NONE"},
-	{AM_STATIC, "static"},
-	{AM_RAINBOW, "rainbow"}
-};

src/state.cpp

@@ -1,139 +0,0 @@
-#include "state.h"
-#include "tools.h"
-#include "mqtt.h"
-
-#include <ArduinoJson.h>
-
-void State::parse_json(char* str) {
-    StaticJsonDocument<512> json;
-    deserializeJson(json, str);
-
-    if(json.containsKey("state")) parse_state(json["state"]);
-    if(json.containsKey("effect")) parse_mode(json["effect"]);
-    if(json.containsKey("duration")) set_duration(json["duration"]);
-    if(json.containsKey("brightness")) set_brightness(json["brightness"]);
-    if(json.containsKey("rgb")) set_color(json["rgb"]);
-    if(json.containsKey("speedup")) set_speedup(json["speedup"]);
-}
-
-void State::parse_state(String state) {
-    if (state.equals("ON")) {
-        set_mode(AM_CORNERS);
-    } else if (state.equals("OFF")) {
-        set_mode(AM_OFF);
-    } else {
-        LOGln("parse_state: Unknown state %s", state.c_str());
-    }
-}
-
-void State::parse_mode(String mode) {
-    AnimationMode m = AM_NONE;
-    for (std::pair<AnimationMode, const char*> pair : animation_mode_names) {
-        if (mode.equals(pair.second)) {
-            m = pair.first;
-            break;
-        }
-    }
-    if (m == AM_NONE) {
-        LOGln("parse_mode: Unknown mode '%s'.", mode.c_str());
-    } else {
-        set_mode(m);
-    }
-}
-
-void State::set_mode(AnimationMode m) {
-    _mode = m;
-}
-
-void State::set_duration(uint16_t d) {
-    _duration = d;
-}
-
-void State::set_brightness(uint8_t b) {
-    _brightness = b;
-}
-
-void State::set_color(JsonObject rgb) {
-    if (!rgb.containsKey("r") || !rgb.containsKey("g") || !rgb.containsKey("b")) {
-        LOGln("set_color: Invalid rgb data.");
-    } else {
-        _color = CRGB(rgb["r"], rgb["g"], rgb["b"]);
-    }
-}
-
-void State::set_speedup(uint8_t s) {
-    _speedup = s;
-}
-
-void State::set(String key, String value) {
-    if (key.equals("state")) { parse_state(value); }
-    else if (key.equals("effect") || key.equals("mode")) { parse_mode(value); }
-    else if (key.equals("duration")) { set_duration(value.toInt()); }
-    else if (key.equals("brightness")) { set_brightness(value.toInt()); }
-    else if (key.equals("color")) {
-        if (value.equals("red")) { _color = CRGB::Red; }
-        else if (value.equals("green")) { _color = CRGB::Green; }
-        else if (value.equals("blue")) { _color = CRGB::Blue; }
-        else if (value.equals("pink")) { _color = CRGB::Pink; }
-        else if (value.equals("yellow")) { _color = CRGB::Yellow; }
-        else if (value.equals("orange")) { _color = CRGB::Orange; }
-        else { LOGln("Unknown color name %s.", value.c_str());}
-    } else if (key.equals("speedup")) { set_speedup(value.toInt()); }
-    else {
-        LOGln("Unknown key '%s'. (For reference: Value is '%s'.)", key.c_str(), value.c_str());
-    }
-}
-
-void State::commit() {
-    if (_brightness >= 0) {
-        if (temp_mode_until == 0) {
-            return_to_brightness = FastLED.getBrightness();
-        }
-        FastLED.setBrightness(_brightness);
-    }
-    if (_mode != AM_NONE) {
-        if (_duration > 0) {
-            temp_mode = _mode;
-            temp_mode_until = millis() + _duration*1000;
-        } else {
-            mode = _mode;
-        }
-    }
-    if (_color != CRGB(0, 0, 0)) {
-        color = _color;
-    }
-
-    publish_current_state();
-}
-
-void State::publish_current_state() {
-    StaticJsonDocument<512> json;
-    json["state"] = (mode==AM_OFF) ? "OFF" : "ON";
-    json["brightness"] = FastLED.getBrightness();
-    json["effect"] = animation_mode_names[get_active_mode()];
-    JsonObject rgb = json.createNestedObject("rgb");
-    rgb["r"] = color.r;
-    rgb["g"] = color.g;
-    rgb["b"] = color.b;
-    String result = "";
-    serializeJson(json, result);
-    LOGln("Reporting current state: %s", result.c_str());
-    mqtt_publish_current_state(result);
-}
-
-AnimationMode State::get_active_mode() {
-    AnimationMode active_mode = mode;
-    if (temp_mode_until > 0) {
-        if (temp_mode_until>millis()) {
-            active_mode = temp_mode;
-        } else {
-            temp_mode_until = 0;
-            if (return_to_brightness != -1) {
-                FastLED.setBrightness(return_to_brightness);
-                return_to_brightness = -1;
-            }
-            State::publish_current_state();
-        }
-    }
-    return active_mode;
-}

src/syslog.cpp

@@ -1,21 +0,0 @@
-#include "syslog.h"
-#include "config.h"
-
-#ifdef SYSLOG_HOST
-	static uint16_t syslog_msg_id = 1;
-
-	void syslog(String msg, uint8_t severity) {
-		uint8_t facility = 16; // local0
-		if (severity > 7) severity = 7;
-		WiFiUDP udp;
-
-		udp.beginPacket(SYSLOG_HOST, SYSLOG_PORT);
-		udp.write("<");
-		udp.write(String(facility * 8 + severity).c_str());
-		udp.write(">1 - " OTA_HOSTNAME " core 1 ");
-		udp.write(String(syslog_msg_id++).c_str());
-		udp.write(" - ");
-		udp.write(msg.c_str());
-		udp.endPacket();
-	}
-#endif

src/wifi.cpp

@@ -1,15 +0,0 @@
-#include "wifi.h"
-#include "tools.h"
-
-void wifi_setup() {
-    Serial.printf("Connecting to WiFi %s...", WIFI_SSID);
-    WiFi.mode(WIFI_STA);
-    WiFi.begin(WIFI_SSID, WIFI_PASS);
-    while (WiFi.status() != WL_CONNECTED) {
-        Serial.print(".");
-        delay(300);
-    }
-    Serial.println();
-    LOGln("Connected as %s", WiFi.localIP().toString().c_str());
-    random16_add_entropy(micros());
-}