70 lines
3.6 KiB
C++
70 lines
3.6 KiB
C++
#include <FastLED.h>
|
|
|
|
// How many leds in your strip?
|
|
#define NUM_LEDS 1
|
|
|
|
// For led chips like WS2812, which have a data line, ground, and power, you just
|
|
// need to define DATA_PIN. For led chipsets that are SPI based (four wires - data, clock,
|
|
// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
|
|
// Clock pin only needed for SPI based chipsets when not using hardware SPI
|
|
#define DATA_PIN 3
|
|
#define CLOCK_PIN 13
|
|
|
|
// Define the array of leds
|
|
CRGB leds[NUM_LEDS];
|
|
|
|
void setup() {
|
|
// Uncomment/edit one of the following lines for your leds arrangement.
|
|
// ## Clockless types ##
|
|
FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS); // GRB ordering is assumed
|
|
// FastLED.addLeds<SM16703, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<TM1829, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<TM1812, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<UCS1904, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<UCS2903, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<WS2852, DATA_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<GS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<SK6812, DATA_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<APA106, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<PL9823, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<WS2813, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<APA104, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<WS2811_400, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<GE8822, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<LPD1886, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<LPD1886_8BIT, DATA_PIN, RGB>(leds, NUM_LEDS);
|
|
// ## Clocked (SPI) types ##
|
|
// FastLED.addLeds<LPD6803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // GRB ordering is typical
|
|
// FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<WS2803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
|
// FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // BGR ordering is typical
|
|
// FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // BGR ordering is typical
|
|
// FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // BGR ordering is typical
|
|
// FastLED.addLeds<SK9822, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS); // BGR ordering is typical
|
|
}
|
|
|
|
void loop() {
|
|
// Turn the LED on, then pause
|
|
leds[0] = CRGB::Red;
|
|
FastLED.show();
|
|
delay(500);
|
|
// Now turn the LED off, then pause
|
|
leds[0] = CRGB::Black;
|
|
FastLED.show();
|
|
delay(500);
|
|
}
|