Added MCP23S17 support as well as changed some pins and added more de-bouncing for the buttons.

include/controller.h

@@ -4,13 +4,16 @@
 #include "config.h"
 #include "player.h"
 #include <MFRC522.h>
+#include <MCP23S17/MCP23S17.h>
 
 class Controller {
 private:
 	MFRC522* _rfid;
+	MCP* _mcp;
 	bool _rfid_enabled = true;
 	void _check_rfid();
 	void _check_serial();
+	void _check_buttons();
 	uint32_t _get_rfid_card_uid();
 	uint32_t _last_rfid_card_uid = 0;
 	Player* _player;
@@ -19,7 +22,9 @@ private:
 	void _execute_serial_command(String cmd);
 	void _execute_command_ls(String path);
 	void _execute_command_help();
+	unsigned long _button_last_pressed_at[NUM_BUTTONS];
+	bool _check_button(uint8_t btn);
 public:
-	Controller(Player* p);
+	Controller(Player* p, MCP* m);
 	void loop();
 };

include/player.h

@@ -4,6 +4,7 @@
 #include <SD.h>
 #include <list>
 #include <map>
+#include <MCP23S17/MCP23S17.h>
 
 #define SCI_MODE 0x00
 #define SCI_STATUS 0x01
@@ -72,8 +73,9 @@ private:
 	uint8_t _volume;
 	uint16_t _stop_delay;
 	uint32_t _skip_to;
+	MCP* _mcp;
 public:
-	Player();
+	Player(MCP* m);
 	void vol_up();
 	void vol_down();
 	void track_next();

include/spi_master.h

@@ -11,18 +11,22 @@ public:
 		pinMode(PIN_SD_CS, OUTPUT);
 		pinMode(PIN_VS1053_XCS, OUTPUT);
 		pinMode(PIN_VS1053_XDCS, OUTPUT);
+		pinMode(PIN_MCP, OUTPUT);
 	}
 	static void enable(uint8_t pin) {
 		digitalWrite(PIN_SD_CS, pin==PIN_SD_CS ? LOW : HIGH);
 		digitalWrite(PIN_VS1053_XCS, pin==PIN_VS1053_XCS ? LOW : HIGH);
 		digitalWrite(PIN_VS1053_XDCS, pin==PIN_VS1053_XDCS ? LOW : HIGH);
+		digitalWrite(PIN_MCP, pin==PIN_MCP ? LOW : HIGH);
+
 	}
 
 	static void printStatus() {
-		Serial.printf("CS state: SD:%d, VS1053_XCS:%d, VS1053_XDCS:%d\n",
+		Serial.printf("CS state: SD:%d, VS1053_XCS:%d, VS1053_XDCS:%d, MCP:%d\n",
 		digitalRead(PIN_SD_CS),
 		digitalRead(PIN_VS1053_XCS),
-		digitalRead(PIN_VS1053_XDCS));
+		digitalRead(PIN_VS1053_XDCS),
+		digitalRead(PIN_MCP));
 	}
 
 	static void disable() {

platformio.ini

@@ -14,4 +14,5 @@ board = esp12e
 framework = arduino
 upload_speed = 512000
 lib_deps = 63
+    https://github.com/n0mjs710/MCP23S17.git
 upload_port = /dev/cu.wchusbserial1420

src/controller.cpp

@@ -1,10 +1,17 @@
 #include "controller.h"
 #include "spi_master.h"
 
-Controller::Controller(Player* p) {
+Controller::Controller(Player* p, MCP* m) {
 	_player = p;
+	_mcp = m;
 	_rfid = new MFRC522(PIN_RC522_CS, MFRC522::UNUSED_PIN);
 
+	SPIMaster::enable(PIN_MCP);
+	_mcp->pinMode(1, INPUT); _mcp->pullupMode(1, HIGH);
+	_mcp->pinMode(2, INPUT); _mcp->pullupMode(2, HIGH);
+	_mcp->pinMode(3, INPUT); _mcp->pullupMode(3, HIGH);
+	_mcp->pinMode(4, INPUT); _mcp->pullupMode(4, HIGH);
+
 	SPIMaster::enable(PIN_RC522_CS);
 	DEBUG("Initializing RC522...");
 	_rfid->PCD_Init();
@@ -13,6 +20,8 @@ Controller::Controller(Player* p) {
 	#endif
 	SPIMaster::disable();
 	INFO("RC522 initialized.\n");
+
+	for (uint8_t i=0; i<NUM_BUTTONS; i++) _button_last_pressed_at[i]=0;
 }
 
 void Controller::loop() {
@@ -22,6 +31,7 @@ void Controller::loop() {
 		_last_rfid_scan_at = now;
 	}
 	_check_serial();
+	_check_buttons();
 }
 
 uint32_t Controller::_get_rfid_card_uid() {
@@ -70,8 +80,8 @@ void Controller::_check_serial() {
 }
 
 void Controller::_execute_serial_command(String cmd) {
-	DEBUG("Executing command: %s", cmd.c_str());	
-	
+	DEBUG("Executing command: %s", cmd.c_str());
+
 	if (cmd.equals("ls")) {
 		_execute_command_ls("/");
 	} else if (cmd.startsWith("ls ")) {
@@ -116,3 +126,43 @@ void Controller::_execute_command_help() {
 	INFO("  - / +     - Decrease or increase the volume\n");
 	INFO("  p / n     - Previous or next track\n");
 }
+
+void Controller::_check_buttons() {
+	SPIMaster::enable(PIN_MCP);
+	SPI.beginTransaction(SPISettings(250000, MSBFIRST, SPI_MODE0));
+	/*if (millis()%100==0) {
+		Serial.printf("Buttons: %d %d %d %d\n", _mcp->digitalRead(1), _mcp->digitalRead(2), _mcp->digitalRead(3), _mcp->digitalRead(4));
+	}*/
+	if (_check_button(0)) {
+		_player->play_album("23f5762e");
+	} else if (_check_button(1)) {
+		_player->vol_up();
+	} else if (_check_button(2)) {
+		_player->vol_down();
+	} else if (_check_button(3)) {
+		_player->track_prev();
+	}
+	SPI.endTransaction();
+	SPIMaster::disable();
+}
+
+bool Controller::_check_button(uint8_t index) {
+	if (index >= NUM_BUTTONS) return false;
+	bool ret = false;
+	uint8_t sum = 0;
+	while (1) {
+		sum = 0;
+		for (int i=0; i<8; i++) {
+			sum += _mcp->digitalRead(index + 1) == HIGH ? 1 : 0;
+		}
+		if (sum==0 || sum==8) break;
+	}
+	if (sum == 0) {
+		if (_button_last_pressed_at[index] + DEBOUNCE_MILLIS < millis()) {
+			DEBUG("Button %d pressed.\n", index);
+			ret = true;
+		}
+		_button_last_pressed_at[index] = millis();
+	}
+	return ret;
+}

src/main.cpp

@@ -1,6 +1,7 @@
 #include <Arduino.h>
 #include <SPI.h>
 #include <SD.h>
+#include <MCP23S17/MCP23S17.h>
 #include "config.h"
 #include "controller.h"
 #include "player.h"
@@ -8,6 +9,7 @@
 
 Controller* controller;
 Player* player;
+MCP* mcp;
 
 void setup() {
 	delay(500);
@@ -20,6 +22,11 @@ void setup() {
 	SPIMaster::init();
 	INFO("SPI initialized.\n");
 
+	DEBUG("Setting up MCP...\n");
+	SPIMaster::enable(PIN_MCP);
+	mcp = new MCP(0, PIN_MCP);
+	INFO("MCP initialized.");
+
 	DEBUG("Setting up SD card...\n");
 	SPIMaster::enable(PIN_SD_CS);
 	if (SD.begin(PIN_SD_CS)) {
@@ -28,9 +35,9 @@ void setup() {
 		ERROR("Could not initialize SD card. Halting.\n");
 		while(1);
 	}
-	player = new Player();
-    controller = new Controller(player);
-    
+	player = new Player(mcp);
+    controller = new Controller(player, mcp);
+
     INFO("Initialization completed.\n");
 }
 

src/player.cpp

@@ -5,18 +5,19 @@
 
 //Player::_spi_settings
 
-Player::Player() {
-	pinMode(XRESET, OUTPUT);
-	digitalWrite(XRESET, HIGH);
+Player::Player(MCP* m) {
+	_mcp = m;
+	_mcp->pinMode(XRESET, OUTPUT);
+	_mcp->digitalWrite(XRESET, HIGH);
 	pinMode(DREQ, INPUT);
 
 	_init();
 }
 
 void Player::_reset() {
-	digitalWrite(XRESET, LOW);
+	_mcp->digitalWrite(XRESET, LOW);
 	delay(100);
-	digitalWrite(XRESET, HIGH);
+	_mcp->digitalWrite(XRESET, HIGH);
 	delay(100);
 	_state = uninitialized;
 	_spi_settings = &_spi_settings_slow; // After reset, communication has to be slow
@@ -24,6 +25,7 @@ void Player::_reset() {
 
 void Player::_init() {
 	SPIMaster::disable();
+	DEBUG("Resetting VS1053...\n");
 	_reset();
 
 	uint16_t result = _read_control_register(SCI_MODE);
@@ -59,14 +61,14 @@ void Player::_init() {
 	set_volume(VOLUME_DEFAULT);
 
 	INFO("VS1053 initialization completed.\n");
-	
+
 	INFO("Checking system sounds...\n");
 	SPIMaster::enable(PIN_SD_CS);
 	_check_system_sound("no_prev_song.mp3");
 	_check_system_sound("no_next_song.mp3");
 	_check_system_sound("volume_max.mp3");
 	_check_system_sound("volume_min.mp3");
-	
+
 	_state = idle;
 }